- Postcode district
- TR14
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Redruth, Hayle, Helston
- Building rules
- England
Why choose sliding doors for extensions in Camborne?
A few practical points decide whether sliding doors for extensions suit a particular room and opening:
For a garden room at the bottom of a Camborne garden, think about access: large glass panels need a clear route from the road to the site.
Where an extension in Camborne faces south or west, ask about solar-control glass, because a wall of glass in a single-storey room can overheat in summer.
- Agreeing a fitting date with your builder lets the extension be made weathertight on programme, so plastering and flooring can follow without waiting on the doors.
- Setting the finished floor level before the screed goes down allows a low threshold, typically 15–25 mm, or a flush one with a drainage channel outside.
- A check survey once the opening is built means the door is made to the real dimensions, accounting for any small variation in the brickwork or blockwork.
Daylight in Camborne and what it means for your glass
At the latitude of Camborne, the midday sun climbs to about 63° in late June but only about 16° in late December, when daylight lasts around 8 h 02 min against 16 h 24 min in midsummer. A south-facing sliding door for an extension lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
Sliding doors for extensions and garden rooms prices in Camborne
Guide prices are the same across Cornwall. They cover the door supplied and fitted into a prepared opening, including VAT, with options itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £5,095–£6,195 |
| 3.0 m | 2 panels | £6,895–£8,395 |
| 4.0 m | 3 panels | £8,395–£10,195 |
See every size on the sliding doors for extensions page or try the guide price tool.
Timescales for sliding doors for extensions in Camborne
Nothing is ordered until you sign off the surveyed specification. The door is made from the finished opening sizes (typically 6–8 weeks for slimline systems after check survey sign-off), and fitting usually takes 1–2 days, scheduled to the build programme. If you are in Redruth or Hayle, the same process and prices apply.
Rules for sliding doors for extensions in England
Doors in an English extension go through the extension's Building Regulations approval. Under Approved Document L, the total area of windows, roof windows and doors is normally capped at 25% of the extension's floor area plus any openings the extension removes, unless your designer shows compensating improvements; the glass must be safety glazing under Approved Document K.
Choosing the specification
- Three or four panels. More panels for wider extension openings, with one or more sliding.
- Corner opening. Sliding panels meeting at a corner with no post, for extensions open on two sides.
- Triple glazing. For low-energy extensions or north-facing walls, subject to panel size limits.
Questions about sliding doors for extensions in Camborne
Is the price different in Camborne?
No. Guide prices for sliding doors for extensions are the same across mainland Britain, including Camborne. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
Can you measure from drawings rather than the built opening?
We can quote from drawings, but we manufacture from a check survey of the built opening, because real openings often differ slightly from the plans. Making a large made-to-measure door from drawings alone risks it not fitting. If a programme makes that unavoidable, any arrangement and who carries the risk would be agreed in writing first.
What structural opening size should my builder leave for sliding doors?
Your builder should leave the structural opening size we give in writing for your chosen door, which is the frame size plus a small fitting tolerance on each side and at the head. The exact figure depends on the system and the threshold detail. We confirm it from your drawings early, then check the built opening before the door is made.
Why does the steel beam matter for sliding doors?
The steel beam above an extension's sliding door matters because every beam bends a little under load, and a large sliding door needs a straight, level head to run freely. If the engineer knows a wide slider will sit under the beam, they can design for low deflection. Too much movement can make panels stiff or bind.