- Postcode district
- TR7
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Truro, Wadebridge, St Austell
- Building rules
- England
Are sliding doors for extensions right for your Newquay home?
Before you settle on a door type, it helps to know what sliding doors for extensions do well and what to check before you order.
Where an extension in Newquay faces south or west, ask about solar-control glass, because a wall of glass in a single-storey room can overheat in summer.
Planning an extension in Newquay? Send us the drawings before the steel is ordered, so the beam above the doors can be designed with the door in mind.
- Setting the finished floor level before the screed goes down allows a low threshold, typically 15–25 mm, or a flush one with a drainage channel outside.
- We provide the structural opening size and fitting tolerances in writing, giving your builder a clear target and avoiding disputes about who measured what.
- Agreeing a fitting date with your builder lets the extension be made weathertight on programme, so plastering and flooring can follow without waiting on the doors.
Sunlight, glass and orientation in Newquay
Sun angles matter for big glazed doors. Around Newquay, midday sun reaches about 63° in summer and drops to about 16° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
Sliding doors for extensions and garden rooms prices in Newquay
These are guide prices for fitted doors, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £5,495–£6,795 |
| 3.0 m | 2 panels | £6,895–£8,395 |
| 3.6 m | 2 panels | £7,795–£9,495 |
See every size on the sliding doors for extensions page or try the guide price tool.
What happens when you order sliding doors for extensions in Newquay?
Here is the usual sequence in Newquay: guide price, free survey, written quote, any building work, then manufacture (typically 6–8 weeks for slimline systems after check survey sign-off). Fitting typically takes 1–2 days, scheduled to the build programme. Nearby, we also survey in Truro, Wadebridge and St Austell.
Rules for sliding doors for extensions in England
Doors in an English extension go through the extension's Building Regulations approval. Under Approved Document L, the total area of windows, roof windows and doors is normally capped at 25% of the extension's floor area plus any openings the extension removes, unless your designer shows compensating improvements; the glass must be safety glazing under Approved Document K.
Specification choices for sliding doors for extensions in Newquay
- Corner opening. Sliding panels meeting at a corner with no post, for extensions open on two sides.
- Flush threshold. A level floor from inside to out, with a drainage channel set into the patio.
- Triple glazing. For low-energy extensions or north-facing walls, subject to panel size limits.
Questions about sliding doors for extensions in Newquay
Do you fit sliding doors for extensions in Newquay?
Yes. We survey and fit sliding doors for extensions in Newquay and across Cornwall, including nearby Truro and Wadebridge. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
How much do sliding doors for an extension cost?
Slimline sliding doors for an extension have a guide price of £7,795–£9,495 for a 3.6 m opening and £9,595–£11,695 for a 4.8 m opening, fitted, inc VAT at standard 2.1 m height. Taller doors, extra panels, special glass and flush thresholds move the price. Your written quote after the check survey fixes it.
Why does the steel beam matter for sliding doors?
The steel beam above an extension's sliding door matters because every beam bends a little under load, and a large sliding door needs a straight, level head to run freely. If the engineer knows a wide slider will sit under the beam, they can design for low deflection. Too much movement can make panels stiff or bind.
What structural opening size should my builder leave for sliding doors?
Your builder should leave the structural opening size we give in writing for your chosen door, which is the frame size plus a small fitting tolerance on each side and at the head. The exact figure depends on the system and the threshold detail. We confirm it from your drawings early, then check the built opening before the door is made.