- Postcode district
- BT71
- Survey
- Free, area covered by arrangement
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Coalisland, Cookstown, Armagh
- Building rules
- Northern Ireland
Is a sliding door for an extension a good fit for your home in Dungannon?
Before you settle on a door type, it helps to know what sliding doors for extensions do well and what to check before you order.
Where an extension in Dungannon faces south or west, ask about solar-control glass, because a wall of glass in a single-storey room can overheat in summer.
When your Dungannon extension is going through Building Control, keep the energy information for the doors to hand, as the inspector may ask for it.
- Setting the finished floor level before the screed goes down allows a low threshold, typically 15–25 mm, or a flush one with a drainage channel outside.
- A check survey once the opening is built means the door is made to the real dimensions, accounting for any small variation in the brickwork or blockwork.
- Telling the engineer the door type and span early lets them design the beam above it to limit deflection, protecting the smooth running of large sliding panels.
Planning glass for the light in Dungannon
Daylight in Dungannon runs from about 7 h 16 min in December to 17 h 15 min in June, with the noon sun at roughly 12° and 59° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
How much do sliding doors for extensions cost in Dungannon?
Guide prices are the same across County Tyrone. They cover the door supplied and fitted into a prepared opening, including VAT, with options itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 2 panels | £6,895–£8,395 |
| 3.6 m | 2 panels | £7,795–£9,495 |
| 6.0 m | 4 panels | £11,395–£13,895 |
See every size on the sliding doors for extensions page or try the guide price tool.
Survey, manufacture and fitting around Dungannon
Here is the usual sequence in Dungannon: guide price, free survey, written quote, any building work, then manufacture (typically 6–8 weeks for slimline systems after check survey sign-off). Fitting typically takes 1–2 days, scheduled to the build programme. Nearby, we also survey in Coalisland, Cookstown and Armagh. Dungannon is in an area we cover by arrangement: the survey is still free, and survey dates, delivery and any travel cost for delivery and fitting are confirmed in your quote before you order.
Do you need approval in Dungannon?
Extensions in Northern Ireland are approved by district council building control under the Building Regulations (Northern Ireland), including their doors. We take on work in Northern Ireland by arrangement.
Finishes and extras for sliding doors for extensions
- Corner opening. Sliding panels meeting at a corner with no post, for extensions open on two sides.
- Flush threshold. A level floor from inside to out, with a drainage channel set into the patio.
- Three or four panels. More panels for wider extension openings, with one or more sliding.
Questions about sliding doors for extensions in Dungannon
Do you fit sliding doors for extensions in Dungannon?
Yes, by arrangement. Dungannon is in an area we cover by arrangement: the survey is still free, and survey dates, delivery and any travel cost for delivery and fitting are confirmed in your quote before you order.
How much do sliding doors for an extension cost?
Slimline sliding doors for an extension have a guide price of £7,795–£9,495 for a 3.6 m opening and £9,595–£11,695 for a 4.8 m opening, fitted, inc VAT at standard 2.1 m height. Taller doors, extra panels, special glass and flush thresholds move the price. Your written quote after the check survey fixes it.
When should I order sliding doors for an extension?
Order sliding doors for an extension as soon as the opening is built and a check survey can be done, and agree the target fitting date with your builder in advance. Slimline doors typically take 6–8 weeks to make after sign-off. Getting a quote from drawings early means the specification is settled and only the final measurements are needed.
What structural opening size should my builder leave for sliding doors?
Your builder should leave the structural opening size we give in writing for your chosen door, which is the frame size plus a small fitting tolerance on each side and at the head. The exact figure depends on the system and the threshold detail. We confirm it from your drawings early, then check the built opening before the door is made.