- Postcode district
- BT71
- Survey
- Free, area covered by arrangement
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Dungannon, Cookstown, Portadown
- Building rules
- Northern Ireland
Sliding doors for extensions and garden rooms in Coalisland: what to know
Before you settle on a door type, it helps to know what sliding doors for extensions do well and what to check before you order.
When your Coalisland extension is going through Building Control, keep the energy information for the doors to hand, as the inspector may ask for it.
Where an extension in Coalisland faces south or west, ask about solar-control glass, because a wall of glass in a single-storey room can overheat in summer.
- Being involved at drawing stage means the opening is formed to suit the door, rather than the door being compromised to suit an opening built a few centimetres out.
- Telling the engineer the door type and span early lets them design the beam above it to limit deflection, protecting the smooth running of large sliding panels.
- Setting the finished floor level before the screed goes down allows a low threshold, typically 15–25 mm, or a flush one with a drainage channel outside.
How much sun will a door in Coalisland get?
Daylight in Coalisland runs from about 7 h 16 min in December to 17 h 16 min in June, with the noon sun at roughly 12° and 59° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
Guide prices for sliding doors for extensions in Coalisland
These are guide prices for fitted doors, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £5,095–£6,195 |
| 2.4 m | 2 panels | £5,995–£7,295 |
| 6.0 m | 4 panels | £11,395–£13,895 |
See every size on the sliding doors for extensions page or try the guide price tool.
Survey, manufacture and fitting around Coalisland
Here is the usual sequence in Coalisland: guide price, free survey, written quote, any building work, then manufacture (typically 6–8 weeks for slimline systems after check survey sign-off). Fitting typically takes 1–2 days, scheduled to the build programme. Nearby, we also survey in Dungannon, Cookstown and Portadown. Coalisland is in an area we cover by arrangement: the survey is still free, and survey dates, delivery and any travel cost for delivery and fitting are confirmed in your quote before you order.
Rules for sliding doors for extensions in Northern Ireland
Extensions in Northern Ireland are approved by district council building control under the Building Regulations (Northern Ireland), including their doors. We take on work in Northern Ireland by arrangement.
Options to consider for your sliding door for an extension
- Corner opening. Sliding panels meeting at a corner with no post, for extensions open on two sides.
- Triple glazing. For low-energy extensions or north-facing walls, subject to panel size limits.
- Three or four panels. More panels for wider extension openings, with one or more sliding.
Questions about sliding doors for extensions in Coalisland
Can you match other doors and windows in my Coalisland home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
How do I get a level threshold in an extension?
A level or flush threshold in an extension needs the finished floor level inside to be set relative to the door sill and the outside paving before the screed goes down. Outside, a drainage channel is needed across the threshold so rain cannot run in. Our thresholds guide explains the options.
Can you work with my builder and architect?
Yes, working with your builder, architect and structural engineer is the normal way we approach extension doors. We can provide technical details, opening sizes, threshold requirements and fixing information, and attend site for the check survey. Your builder forms the opening and prepares the floor, and our installers fit the doors to the agreed programme.
Why does the steel beam matter for sliding doors?
The steel beam above an extension's sliding door matters because every beam bends a little under load, and a large sliding door needs a straight, level head to run freely. If the engineer knows a wide slider will sit under the beam, they can design for low deflection. Too much movement can make panels stiff or bind.