- Postcode district
- BT71
- Survey
- Free, area covered by arrangement
- Typical lead time
- Typically 8–10 weeks from survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Dungannon, Cookstown, Portadown
- Building rules
- Northern Ireland
Is a timber and alu-clad sliding door a good fit for your home in Coalisland?
Before you settle on a door type, it helps to know what timber and alu-clad sliding doors do well and what to check before you order.
Because timber and alu-clad sliding doors typically take 8–10 weeks to make, a Coalisland building programme runs more smoothly when the survey happens as soon as the opening size is fixed.
Where the back of a Coalisland home faces south and takes full sun, choosing alu-clad keeps the timber protected and cuts out the re-coating that strong sunlight makes necessary.
- A timber sliding door sits comfortably beside brick, stone, render or weatherboarding, which helps where a modern metal frame would look out of character.
- Engineered timber is laminated from several layers with the grain opposed, so frames resist the twisting and warping that solid timber can suffer as the seasons change.
- Stains, paints and lacquers are sprayed in the factory under controlled conditions, giving a more even and longer-lasting coat than a finish brushed on site.
How much sun will a door in Coalisland get?
Sun angles matter for big glazed doors. Around Coalisland, midday sun reaches about 59° in summer and drops to about 12° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
Guide prices for timber and alu-clad sliding doors in Coalisland
Guide prices are the same across County Tyrone: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £5,095–£6,195 |
| 2.4 m | 2 panels | £6,495–£7,995 |
| 3.0 m | 2 panels | £7,495–£9,095 |
See every size on the timber and alu-clad sliding doors page or try the guide price tool.
Timescales for timber and alu-clad sliding doors in Coalisland
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 8–10 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a two-panel swap; 1–2 days for larger doors for a door like this. Coalisland is in an area we cover by arrangement: the survey is still free, and survey dates, delivery and any travel cost for delivery and fitting are confirmed in your quote before you order.
Do you need approval in Coalisland?
In Northern Ireland, the Building Regulations (Northern Ireland) apply through your district council's building control service, with energy guidance in Technical Booklet F1. Work in Northern Ireland is by arrangement, and we confirm the approval route for your property at survey.
Options to consider for your timber and alu-clad sliding door
- Timber species. Oak or another hardwood for a visible grain, or engineered softwood where a painted finish is planned.
- Glass. Double or triple glazed safety glass, with slim glazing bars available for a period look.
- Sliding hardware. Inline rollers on smaller doors, or lift and slide gear for larger and heavier panels.
Questions about timber and alu-clad sliding doors in Coalisland
How soon can you survey in Coalisland?
Survey dates in the BT71 district are arranged individually when we reply to your enquiry. After you approve the written quote, manufacture is typically 8–10 weeks from survey sign-off.
Are timber sliding doors secure?
Timber sliding doors are secure when built with multi-point locking, laminated glass and robust sections, because engineered timber gives the locking keeps a solid, dense fixing. Timber systems are available tested to PAS 24, the UK enhanced security test standard for doorsets. Internally beaded glass and a key-locking handle add further resistance to forced entry.
How big can a timber sliding door be?
A timber sliding door in our range is typically about 1.5 m to 4.8 m wide overall, in two to four panels, at standard 2.1 m height or taller on request. Individual panel sizes depend on the system and glass weight; larger panels usually move to lift and slide hardware so they stay easy to open. Sizes are confirmed after survey.
How often do timber sliding doors need treating?
Timber sliding doors need the outside re-coated every few years, depending on how exposed the elevation is and which finish system is used; doors facing full sun or coastal weather need attention soonest. Alu-clad doors avoid this, needing only an occasional wash outside. Inside, timber only needs wiping and an occasional refresh of the lacquer or oil, and a clean track protects the rollers.