Are timber and alu-clad sliding doors right for homes in County Tyrone?
Here is what to weigh up if you are considering timber and alu-clad sliding doors for a home in County Tyrone:
Where the back of a County Tyrone home faces south and takes full sun, choosing alu-clad keeps the timber protected and cuts out the re-coating that strong sunlight makes necessary.
Because timber and alu-clad sliding doors typically take 8–10 weeks to make, a County Tyrone building programme runs more smoothly when the survey happens as soon as the opening size is fixed.
- A timber sliding door sits comfortably beside brick, stone, render or weatherboarding, which helps where a modern metal frame would look out of character.
- Scratches and dents on internal timber faces can usually be sanded and refinished locally, rather than needing a whole panel replaced.
- Wood is a natural insulator, so timber frames feel warm to the touch in winter and help keep condensation off the inside face of the frame.
Guide prices for timber and alu-clad sliding doors in County Tyrone
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £5,595–£6,795 |
| 2.1 m | 2 panels | £5,995–£7,395 |
| 3.6 m | 3 panels | £8,395–£10,295 |
| 4.0 m | 3 panels | £9,095–£11,095 |
Every size is on the timber and alu-clad sliding doors page.
Daylight and glass in County Tyrone
The midday sun over County Tyrone ranges from about 12° at the winter solstice to about 59° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
Towns we cover in County Tyrone
We survey and fit timber and alu-clad sliding doors in 6 towns across County Tyrone, including the BT71, BT75, BT78, BT80, BT82 postcode districts.
Approvals in Northern Ireland
Building control in Northern Ireland is run by district councils under the Building Regulations (Northern Ireland). We take on work in Northern Ireland by arrangement and confirm what approval your door needs before anything is ordered.
Questions about timber and alu-clad sliding doors in County Tyrone
Can you match other doors and windows in my County Tyrone home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
How big can a timber sliding door be?
A timber sliding door in our range is typically about 1.5 m to 4.8 m wide overall, in two to four panels, at standard 2.1 m height or taller on request. Individual panel sizes depend on the system and glass weight; larger panels usually move to lift and slide hardware so they stay easy to open. Sizes are confirmed after survey.
How often do timber sliding doors need treating?
Timber sliding doors need the outside re-coated every few years, depending on how exposed the elevation is and which finish system is used; doors facing full sun or coastal weather need attention soonest. Alu-clad doors avoid this, needing only an occasional wash outside. Inside, timber only needs wiping and an occasional refresh of the lacquer or oil, and a clean track protects the rollers.
How much do timber sliding doors cost?
Timber and alu-clad sliding doors start from a guide price of £5,095 for a 1.5 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 2.4 m door is a guide £6,495–£7,995, and a 4.8 m four-panel door is around £10,395. Species, cladding, finish and glass all affect the figure, and the final price is fixed in a written quote after survey.