- Postcode district
- BT78
- Survey
- Free, area covered by arrangement
- Typical lead time
- Typically 8–10 weeks from survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Fivemiletown, Irvinestown, Strabane
- Building rules
- Northern Ireland
Is a timber and alu-clad sliding door a good fit for your home in Omagh?
Here is what to weigh up if you are considering timber and alu-clad sliding doors for a home in Omagh:
For a listed building or a house in a conservation area in Omagh, check with the local planning authority before choosing any new door; timber frames are often closer in character to the original joinery.
Whether you live in Omagh or elsewhere in County Tyrone, an exposed coastal or hilltop elevation makes a strong case for alu-clad rather than all-timber outside.
- Stains, paints and lacquers are sprayed in the factory under controlled conditions, giving a more even and longer-lasting coat than a finish brushed on site.
- Engineered timber is laminated from several layers with the grain opposed, so frames resist the twisting and warping that solid timber can suffer as the seasons change.
- Scratches and dents on internal timber faces can usually be sanded and refinished locally, rather than needing a whole panel replaced.
How much sun will a door in Omagh get?
Sun angles matter for big glazed doors. Around Omagh, midday sun reaches about 59° in summer and drops to about 12° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
Guide prices for timber and alu-clad sliding doors in Omagh
Guide prices are the same across County Tyrone: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 2 panels | £7,495–£9,095 |
| 3.6 m | 3 panels | £8,395–£10,295 |
| 4.8 m | 4 panels | £10,395–£12,595 |
See every size on the timber and alu-clad sliding doors page or try the guide price tool.
How fitting works in Omagh
Surveys in the BT78 district are booked at a time that suits you. After you approve the quote, manufacture is typically 8–10 weeks from survey sign-off; on fitting day the old door comes out, the new frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1 day for a two-panel swap; 1–2 days for larger doors. Omagh is in an area we cover by arrangement: the survey is still free, and survey dates, delivery and any travel cost for delivery and fitting are confirmed in your quote before you order.
Do you need approval in Omagh?
Building control in Northern Ireland is run by district councils under the Building Regulations (Northern Ireland). We take on work in Northern Ireland by arrangement and confirm what approval your door needs before anything is ordered.
Options to consider for your timber and alu-clad sliding door
- Sliding hardware. Inline rollers on smaller doors, or lift and slide gear for larger and heavier panels.
- Interior finish. Clear lacquer, a wood stain or a painted colour, chosen to match floors, beams or kitchen units.
- Glass. Double or triple glazed safety glass, with slim glazing bars available for a period look.
Questions about timber and alu-clad sliding doors in Omagh
Do I need building approval for timber and alu-clad sliding doors in Omagh?
In Northern Ireland the Building Regulations (Northern Ireland) apply through district council building control; work there is by arrangement. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
How often do timber sliding doors need treating?
Timber sliding doors need the outside re-coated every few years, depending on how exposed the elevation is and which finish system is used; doors facing full sun or coastal weather need attention soonest. Alu-clad doors avoid this, needing only an occasional wash outside. Inside, timber only needs wiping and an occasional refresh of the lacquer or oil, and a clean track protects the rollers.
How long do timber sliding doors take to make?
Timber and alu-clad sliding doors typically take 8–10 weeks to make after survey sign-off, longer than metal or uPVC, because each door is joinery-made, factory finished and allowed to cure before delivery. Fitting typically takes 1 day for a two-panel swap and 1–2 days for larger doors. These are typical timescales, confirmed once your order is placed.
How big can a timber sliding door be?
A timber sliding door in our range is typically about 1.5 m to 4.8 m wide overall, in two to four panels, at standard 2.1 m height or taller on request. Individual panel sizes depend on the system and glass weight; larger panels usually move to lift and slide hardware so they stay easy to open. Sizes are confirmed after survey.