- Postcode district
- NP20
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Risca, Cwmbran, Pontypool
- Building rules
- Wales
What sliding doors for extensions offer homes in Newport (Gwent)
Before you settle on a door type, it helps to know what sliding doors for extensions do well and what to check before you order.
Where an extension in Newport (Gwent) faces south or west, ask about solar-control glass, because a wall of glass in a single-storey room can overheat in summer.
If your Newport (Gwent) builder is about to pour the screed, confirm the finished floor level for the threshold first, because it is very hard to change afterwards.
- Telling the engineer the door type and span early lets them design the beam above it to limit deflection, protecting the smooth running of large sliding panels.
- Being involved at drawing stage means the opening is formed to suit the door, rather than the door being compromised to suit an opening built a few centimetres out.
- Setting the finished floor level before the screed goes down allows a low threshold, typically 15–25 mm, or a flush one with a drainage channel outside.
Planning glass for the light in Newport (Gwent)
Because Newport (Gwent) sees long summer days (about 16 h 39 min) and short winter ones (about 7 h 49 min), the elevation your door faces makes a real difference. With the midday sun at about 15° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
Sliding doors for extensions and garden rooms prices in Newport (Gwent)
These are guide prices for fitted doors, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £5,095–£6,195 |
| 2.1 m | 2 panels | £5,495–£6,795 |
| 2.4 m | 2 panels | £5,995–£7,295 |
See every size on the sliding doors for extensions page or try the guide price tool.
Survey, manufacture and fitting around Newport (Gwent)
Nothing is ordered until you sign off the surveyed specification. The door is made from the finished opening sizes (typically 6–8 weeks for slimline systems after check survey sign-off), and fitting usually takes 1–2 days, scheduled to the build programme. If you are in Risca or Cwmbran, the same process and prices apply.
Do you need approval in Newport (Gwent)?
In Wales, sliding doors in an extension are approved as part of the extension's Building Regulations application, and the glazing must meet the Welsh energy and safety glazing requirements, including the limits on how much of an extension can be glazed.
Choosing the specification
- Triple glazing. For low-energy extensions or north-facing walls, subject to panel size limits.
- Three or four panels. More panels for wider extension openings, with one or more sliding.
- Corner opening. Sliding panels meeting at a corner with no post, for extensions open on two sides.
Questions about sliding doors for extensions in Newport (Gwent)
Can you match other doors and windows in my Newport (Gwent) home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
How do I get a level threshold in an extension?
A level or flush threshold in an extension needs the finished floor level inside to be set relative to the door sill and the outside paving before the screed goes down. Outside, a drainage channel is needed across the threshold so rain cannot run in. Our thresholds guide explains the options.
Can you measure from drawings rather than the built opening?
We can quote from drawings, but we manufacture from a check survey of the built opening, because real openings often differ slightly from the plans. Making a large made-to-measure door from drawings alone risks it not fitting. If a programme makes that unavoidable, any arrangement and who carries the risk would be agreed in writing first.
Can you work with my builder and architect?
Yes, working with your builder, architect and structural engineer is the normal way we approach extension doors. We can provide technical details, opening sizes, threshold requirements and fixing information, and attend site for the check survey. Your builder forms the opening and prepares the floor, and our installers fit the doors to the agreed programme.