- Postcode district
- BS21
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Nailsea, Portishead, Weston-super-Mare
- Building rules
- England
Are sliding doors for extensions right for your Clevedon home?
A few practical points decide whether sliding doors for extensions suit a particular room and opening:
If your Clevedon builder is about to pour the screed, confirm the finished floor level for the threshold first, because it is very hard to change afterwards.
For a garden room at the bottom of a Clevedon garden, think about access: large glass panels need a clear route from the road to the site.
- Telling the engineer the door type and span early lets them design the beam above it to limit deflection, protecting the smooth running of large sliding panels.
- A check survey once the opening is built means the door is made to the real dimensions, accounting for any small variation in the brickwork or blockwork.
- We provide the structural opening size and fitting tolerances in writing, giving your builder a clear target and avoiding disputes about who measured what.
Sunlight, glass and orientation in Clevedon
Because Clevedon sees long summer days (about 16 h 38 min) and short winter ones (about 7 h 50 min), the elevation your door faces makes a real difference. With the midday sun at about 15° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
What should you budget for sliding doors for extensions in Clevedon?
These are guide prices for fitted doors, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £5,095–£6,195 |
| 2.1 m | 2 panels | £5,495–£6,795 |
| 3.0 m | 2 panels | £6,895–£8,395 |
See every size on the sliding doors for extensions page or try the guide price tool.
What happens when you order sliding doors for extensions in Clevedon?
Here is the usual sequence in Clevedon: guide price, free survey, written quote, any building work, then manufacture (typically 6–8 weeks for slimline systems after check survey sign-off). Fitting typically takes 1–2 days, scheduled to the build programme. Nearby, we also survey in Nailsea, Portishead and Weston-super-Mare.
Do you need approval in Clevedon?
Doors in an English extension go through the extension's Building Regulations approval. Under Approved Document L, the total area of windows, roof windows and doors is normally capped at 25% of the extension's floor area plus any openings the extension removes, unless your designer shows compensating improvements; the glass must be safety glazing under Approved Document K.
Options to consider for your sliding door for an extension
- Three or four panels. More panels for wider extension openings, with one or more sliding.
- Two-panel slimline. One sliding and one fixed panel, suiting openings up to around 3.6 m depending on the system.
- Triple glazing. For low-energy extensions or north-facing walls, subject to panel size limits.
Questions about sliding doors for extensions in Clevedon
Can you match other doors and windows in my Clevedon home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
What structural opening size should my builder leave for sliding doors?
Your builder should leave the structural opening size we give in writing for your chosen door, which is the frame size plus a small fitting tolerance on each side and at the head. The exact figure depends on the system and the threshold detail. We confirm it from your drawings early, then check the built opening before the door is made.
Can you measure from drawings rather than the built opening?
We can quote from drawings, but we manufacture from a check survey of the built opening, because real openings often differ slightly from the plans. Making a large made-to-measure door from drawings alone risks it not fitting. If a programme makes that unavoidable, any arrangement and who carries the risk would be agreed in writing first.
Why does the steel beam matter for sliding doors?
The steel beam above an extension's sliding door matters because every beam bends a little under load, and a large sliding door needs a straight, level head to run freely. If the engineer knows a wide slider will sit under the beam, they can design for low deflection. Too much movement can make panels stiff or bind.