- Postcode district
- ME10
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Faversham, Gillingham, Rochester
- Building rules
- England
What sliding doors for extensions offer homes in Sittingbourne
The right door depends on the opening, the room and the way you use the garden. Here is how sliding doors for extensions tend to work out in practice:
When your Sittingbourne extension is going through Building Control, keep the energy information for the doors to hand, as the inspector may ask for it.
Planning an extension in Sittingbourne? Send us the drawings before the steel is ordered, so the beam above the doors can be designed with the door in mind.
- We provide the structural opening size and fitting tolerances in writing, giving your builder a clear target and avoiding disputes about who measured what.
- Garden rooms benefit from the same approach, with a door sized to the frame and a header designed to carry the roof without pressing down on the door.
- A check survey once the opening is built means the door is made to the real dimensions, accounting for any small variation in the brickwork or blockwork.
Sunlight, glass and orientation in Sittingbourne
Because Sittingbourne sees long summer days (about 16 h 37 min) and short winter ones (about 7 h 51 min), the elevation your door faces makes a real difference. With the midday sun at about 15° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
How much do sliding doors for extensions cost in Sittingbourne?
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Sittingbourne home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £5,995–£7,295 |
| 3.0 m | 2 panels | £6,895–£8,395 |
| 4.8 m | 3 panels | £9,595–£11,695 |
See every size on the sliding doors for extensions page or try the guide price tool.
From survey to fitted door in Sittingbourne
Surveys in the ME10 district are booked at a time that suits you. Once the opening is ready and measured, manufacture is typically 6–8 weeks for slimline systems after check survey sign-off; on fitting day the frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1–2 days, scheduled to the build programme.
Do you need approval in Sittingbourne?
In England, sliding doors in a new extension are covered by the extension's own Building Regulations application rather than a separate door notification. Approved Document L limits the glazed area: windows, roof windows and doors should not normally exceed 25% of the extension's floor area plus the area of any windows or doors lost to the extension, unless the extra glass is compensated for elsewhere. The doors must also meet the energy and safety glazing standards.
Specification choices for sliding doors for extensions in Sittingbourne
- Corner opening. Sliding panels meeting at a corner with no post, for extensions open on two sides.
- Triple glazing. For low-energy extensions or north-facing walls, subject to panel size limits.
- Three or four panels. More panels for wider extension openings, with one or more sliding.
Questions about sliding doors for extensions in Sittingbourne
Do I need building approval for sliding doors for extensions in Sittingbourne?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
How do I get a level threshold in an extension?
A level or flush threshold in an extension needs the finished floor level inside to be set relative to the door sill and the outside paving before the screed goes down. Outside, a drainage channel is needed across the threshold so rain cannot run in. Our thresholds guide explains the options.
Why does the steel beam matter for sliding doors?
The steel beam above an extension's sliding door matters because every beam bends a little under load, and a large sliding door needs a straight, level head to run freely. If the engineer knows a wide slider will sit under the beam, they can design for low deflection. Too much movement can make panels stiff or bind.
When should I order sliding doors for an extension?
Order sliding doors for an extension as soon as the opening is built and a check survey can be done, and agree the target fitting date with your builder in advance. Slimline doors typically take 6–8 weeks to make after sign-off. Getting a quote from drawings early means the specification is settled and only the final measurements are needed.