- Postcode district
- S80
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Dinnington, Retford, Staveley
- Building rules
- England
Is a sliding door for an extension a good fit for your home in Worksop?
The right door depends on the opening, the room and the way you use the garden. Here is how sliding doors for extensions tend to work out in practice:
For a garden room at the bottom of a Worksop garden, think about access: large glass panels need a clear route from the road to the site.
Self-building in Worksop or elsewhere in Nottinghamshire? Ask for the sliding doors to be quoted as part of a wider glazing package so the frames, colours and glass match across the house.
- Setting the finished floor level before the screed goes down allows a low threshold, typically 15–25 mm, or a flush one with a drainage channel outside.
- Being involved at drawing stage means the opening is formed to suit the door, rather than the door being compromised to suit an opening built a few centimetres out.
- Telling the engineer the door type and span early lets them design the beam above it to limit deflection, protecting the smooth running of large sliding panels.
Light and sun in Worksop
The midday sun over Worksop ranges from about 13° at the winter solstice to about 60° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
Guide prices for sliding doors for extensions in Worksop
Guide prices are the same across Nottinghamshire. They cover the door supplied and fitted into a prepared opening, including VAT, with options itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.6 m | 2 panels | £7,795–£9,495 |
| 4.8 m | 3 panels | £9,595–£11,695 |
| 6.0 m | 4 panels | £11,395–£13,895 |
See every size on the sliding doors for extensions page or try the guide price tool.
How fitting works in Worksop
Surveys in the S80 district are booked at a time that suits you. Once the opening is ready and measured, manufacture is typically 6–8 weeks for slimline systems after check survey sign-off; on fitting day the frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1–2 days, scheduled to the build programme.
Rules for sliding doors for extensions in England
Doors in an English extension go through the extension's Building Regulations approval. Under Approved Document L, the total area of windows, roof windows and doors is normally capped at 25% of the extension's floor area plus any openings the extension removes, unless your designer shows compensating improvements; the glass must be safety glazing under Approved Document K.
Specification choices for sliding doors for extensions in Worksop
- Corner opening. Sliding panels meeting at a corner with no post, for extensions open on two sides.
- Solar-control glass. Coated glass for south- and west-facing extensions prone to summer overheating.
- Triple glazing. For low-energy extensions or north-facing walls, subject to panel size limits.
Questions about sliding doors for extensions in Worksop
Is the price different in Worksop?
No. Guide prices for sliding doors for extensions are the same across mainland Britain, including Worksop. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
How do I get a level threshold in an extension?
A level or flush threshold in an extension needs the finished floor level inside to be set relative to the door sill and the outside paving before the screed goes down. Outside, a drainage channel is needed across the threshold so rain cannot run in. Our thresholds guide explains the options.
What structural opening size should my builder leave for sliding doors?
Your builder should leave the structural opening size we give in writing for your chosen door, which is the frame size plus a small fitting tolerance on each side and at the head. The exact figure depends on the system and the threshold detail. We confirm it from your drawings early, then check the built opening before the door is made.
Can you measure from drawings rather than the built opening?
We can quote from drawings, but we manufacture from a check survey of the built opening, because real openings often differ slightly from the plans. Making a large made-to-measure door from drawings alone risks it not fitting. If a programme makes that unavoidable, any arrangement and who carries the risk would be agreed in writing first.