- Postcode district
- PH15
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Pitlochry, Crieff, Blairgowrie
- Building rules
- Scotland
Is a sliding door for an extension a good fit for your home in Aberfeldy?
A few practical points decide whether sliding doors for extensions suit a particular room and opening:
When your Aberfeldy extension is going through Building Control, keep the energy information for the doors to hand, as the inspector may ask for it.
Where an extension in Aberfeldy faces south or west, ask about solar-control glass, because a wall of glass in a single-storey room can overheat in summer.
- We provide the structural opening size and fitting tolerances in writing, giving your builder a clear target and avoiding disputes about who measured what.
- Garden rooms benefit from the same approach, with a door sized to the frame and a header designed to carry the roof without pressing down on the door.
- Being involved at drawing stage means the opening is formed to suit the door, rather than the door being compromised to suit an opening built a few centimetres out.
Daylight in Aberfeldy and what it means for your glass
Because Aberfeldy sees long summer days (about 17 h 47 min) and short winter ones (about 6 h 48 min), the elevation your door faces makes a real difference. With the midday sun at about 10° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
What should you budget for sliding doors for extensions in Aberfeldy?
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Aberfeldy home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £5,495–£6,795 |
| 2.4 m | 2 panels | £5,995–£7,295 |
| 3.6 m | 2 panels | £7,795–£9,495 |
See every size on the sliding doors for extensions page or try the guide price tool.
What happens when you order sliding doors for extensions in Aberfeldy?
Nothing is ordered until you sign off the surveyed specification. The door is made from the finished opening sizes (typically 6–8 weeks for slimline systems after check survey sign-off), and fitting usually takes 1–2 days, scheduled to the build programme. If you are in Pitlochry or Crieff, the same process and prices apply.
Rules for sliding doors for extensions in Scotland
In Scotland, an extension needs a building warrant before work starts, and the doors are covered by it; the design must meet the Scottish building standards for energy and safety glazing.
Finishes and extras for sliding doors for extensions
- Triple glazing. For low-energy extensions or north-facing walls, subject to panel size limits.
- Solar-control glass. Coated glass for south- and west-facing extensions prone to summer overheating.
- Two-panel slimline. One sliding and one fixed panel, suiting openings up to around 3.6 m depending on the system.
Questions about sliding doors for extensions in Aberfeldy
Do you fit sliding doors for extensions in Aberfeldy?
Yes. We survey and fit sliding doors for extensions in Aberfeldy and across Perth and Kinross, including nearby Pitlochry and Crieff. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
Can you measure from drawings rather than the built opening?
We can quote from drawings, but we manufacture from a check survey of the built opening, because real openings often differ slightly from the plans. Making a large made-to-measure door from drawings alone risks it not fitting. If a programme makes that unavoidable, any arrangement and who carries the risk would be agreed in writing first.
Why does the steel beam matter for sliding doors?
The steel beam above an extension's sliding door matters because every beam bends a little under load, and a large sliding door needs a straight, level head to run freely. If the engineer knows a wide slider will sit under the beam, they can design for low deflection. Too much movement can make panels stiff or bind.
What structural opening size should my builder leave for sliding doors?
Your builder should leave the structural opening size we give in writing for your chosen door, which is the frame size plus a small fitting tolerance on each side and at the head. The exact figure depends on the system and the threshold detail. We confirm it from your drawings early, then check the built opening before the door is made.