- Postcode district
- SY8
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Tenbury Wells, Leominster, Church Stretton
- Building rules
- England
Is a sliding door for an extension a good fit for your home in Ludlow?
A few practical points decide whether sliding doors for extensions suit a particular room and opening:
If your Ludlow builder is about to pour the screed, confirm the finished floor level for the threshold first, because it is very hard to change afterwards.
When your Ludlow extension is going through Building Control, keep the energy information for the doors to hand, as the inspector may ask for it.
- Garden rooms benefit from the same approach, with a door sized to the frame and a header designed to carry the roof without pressing down on the door.
- Being involved at drawing stage means the opening is formed to suit the door, rather than the door being compromised to suit an opening built a few centimetres out.
- A check survey once the opening is built means the door is made to the real dimensions, accounting for any small variation in the brickwork or blockwork.
Sunlight, glass and orientation in Ludlow
Because Ludlow sees long summer days (about 16 h 48 min) and short winter ones (about 7 h 40 min), the elevation your door faces makes a real difference. With the midday sun at about 14° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
Sliding doors for extensions and garden rooms prices in Ludlow
Guide prices are the same across Shropshire. They cover the door supplied and fitted into a prepared opening, including VAT, with options itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £5,095–£6,195 |
| 2.4 m | 2 panels | £5,995–£7,295 |
| 6.0 m | 4 panels | £11,395–£13,895 |
See every size on the sliding doors for extensions page or try the guide price tool.
Survey, manufacture and fitting around Ludlow
Here is the usual sequence in Ludlow: guide price, free survey, written quote, any building work, then manufacture (typically 6–8 weeks for slimline systems after check survey sign-off). Fitting typically takes 1–2 days, scheduled to the build programme. Nearby, we also survey in Tenbury Wells, Leominster and Church Stretton.
Rules for sliding doors for extensions in England
Doors in an English extension go through the extension's Building Regulations approval. Under Approved Document L, the total area of windows, roof windows and doors is normally capped at 25% of the extension's floor area plus any openings the extension removes, unless your designer shows compensating improvements; the glass must be safety glazing under Approved Document K.
Options to consider for your sliding door for an extension
- Corner opening. Sliding panels meeting at a corner with no post, for extensions open on two sides.
- Triple glazing. For low-energy extensions or north-facing walls, subject to panel size limits.
- Flush threshold. A level floor from inside to out, with a drainage channel set into the patio.
Questions about sliding doors for extensions in Ludlow
Do I need building approval for sliding doors for extensions in Ludlow?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
When should I order sliding doors for an extension?
Order sliding doors for an extension as soon as the opening is built and a check survey can be done, and agree the target fitting date with your builder in advance. Slimline doors typically take 6–8 weeks to make after sign-off. Getting a quote from drawings early means the specification is settled and only the final measurements are needed.
Can you work with my builder and architect?
Yes, working with your builder, architect and structural engineer is the normal way we approach extension doors. We can provide technical details, opening sizes, threshold requirements and fixing information, and attend site for the check survey. Your builder forms the opening and prepares the floor, and our installers fit the doors to the agreed programme.
Can you measure from drawings rather than the built opening?
We can quote from drawings, but we manufacture from a check survey of the built opening, because real openings often differ slightly from the plans. Making a large made-to-measure door from drawings alone risks it not fitting. If a programme makes that unavoidable, any arrangement and who carries the risk would be agreed in writing first.