- Postcode district
- GU1
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Godalming, Woking, Cranleigh
- Building rules
- England
Are sliding doors for extensions right for your Guildford home?
Most homeowners choosing sliding doors for extensions want the same things: more light, a clear view and a door that is easy to live with.
If your Guildford builder is about to pour the screed, confirm the finished floor level for the threshold first, because it is very hard to change afterwards.
Where an extension in Guildford faces south or west, ask about solar-control glass, because a wall of glass in a single-storey room can overheat in summer.
- Being involved at drawing stage means the opening is formed to suit the door, rather than the door being compromised to suit an opening built a few centimetres out.
- Telling the engineer the door type and span early lets them design the beam above it to limit deflection, protecting the smooth running of large sliding panels.
- Garden rooms benefit from the same approach, with a door sized to the frame and a header designed to carry the roof without pressing down on the door.
How much sun will a door in Guildford get?
Because Guildford sees long summer days (about 16 h 35 min) and short winter ones (about 7 h 52 min), the elevation your door faces makes a real difference. With the midday sun at about 15° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
Guide prices for sliding doors for extensions in Guildford
Guide prices are the same across Surrey. They cover the door supplied and fitted into a prepared opening, including VAT, with options itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £5,495–£6,795 |
| 3.6 m | 2 panels | £7,795–£9,495 |
| 6.0 m | 4 panels | £11,395–£13,895 |
See every size on the sliding doors for extensions page or try the guide price tool.
Timescales for sliding doors for extensions in Guildford
Surveys in the GU1 district are booked at a time that suits you. Once the opening is ready and measured, manufacture is typically 6–8 weeks for slimline systems after check survey sign-off; on fitting day the frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1–2 days, scheduled to the build programme.
Rules for sliding doors for extensions in England
Doors in an English extension go through the extension's Building Regulations approval. Under Approved Document L, the total area of windows, roof windows and doors is normally capped at 25% of the extension's floor area plus any openings the extension removes, unless your designer shows compensating improvements; the glass must be safety glazing under Approved Document K.
Choosing the specification
- Two-panel slimline. One sliding and one fixed panel, suiting openings up to around 3.6 m depending on the system.
- Flush threshold. A level floor from inside to out, with a drainage channel set into the patio.
- Solar-control glass. Coated glass for south- and west-facing extensions prone to summer overheating.
Questions about sliding doors for extensions in Guildford
How soon can you survey in Guildford?
Surveys in the GU1 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 6–8 weeks for slimline systems after check survey sign-off.
How do I get a level threshold in an extension?
A level or flush threshold in an extension needs the finished floor level inside to be set relative to the door sill and the outside paving before the screed goes down. Outside, a drainage channel is needed across the threshold so rain cannot run in. Our thresholds guide explains the options.
What sliding doors suit a garden room?
A garden room usually suits a two-panel or three-panel sliding door sized to the front of the building, with a header strong enough to carry the roof without pressing on the frame. Aluminium systems are a common choice because they are stable and need little maintenance. Glass with good insulation helps if the room will be used all year.
Can you work with my builder and architect?
Yes, working with your builder, architect and structural engineer is the normal way we approach extension doors. We can provide technical details, opening sizes, threshold requirements and fixing information, and attend site for the check survey. Your builder forms the opening and prepares the floor, and our installers fit the doors to the agreed programme.