Sliding doors for extensions and garden rooms across Surrey
Most homeowners choosing sliding doors for extensions want the same things: more light, a clear view and a door that is easy to live with.
When your Surrey extension is going through Building Control, keep the energy information for the doors to hand, as the inspector may ask for it.
For a garden room at the bottom of a Surrey garden, think about access: large glass panels need a clear route from the road to the site.
- We provide the structural opening size and fitting tolerances in writing, giving your builder a clear target and avoiding disputes about who measured what.
- Garden rooms benefit from the same approach, with a door sized to the frame and a header designed to carry the roof without pressing down on the door.
- A check survey once the opening is built means the door is made to the real dimensions, accounting for any small variation in the brickwork or blockwork.
Guide prices for sliding doors for extensions in Surrey
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £5,995–£7,295 |
| 3.6 m | 2 panels | £7,795–£9,495 |
| 4.0 m | 3 panels | £8,395–£10,195 |
| 6.0 m | 4 panels | £11,395–£13,895 |
Every size is on the sliding doors for extensions page.
Daylight and glass in Surrey
Daylight in Surrey runs from about 7 h 52 min in December to 16 h 35 min in June, with the noon sun at roughly 15° and 62° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
Towns we cover in Surrey
We survey and fit sliding doors for extensions in 14 towns across Surrey, including the GU1, GU15, GU21, GU27, GU6, GU7 postcode districts.
Approvals in England
In England, sliding doors in a new extension are covered by the extension's own Building Regulations application rather than a separate door notification. Approved Document L limits the glazed area: windows, roof windows and doors should not normally exceed 25% of the extension's floor area plus the area of any windows or doors lost to the extension, unless the extra glass is compensated for elsewhere. The doors must also meet the energy and safety glazing standards.
Questions about sliding doors for extensions in Surrey
How soon can you survey in Surrey?
Surveys in Surrey are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 6–8 weeks for slimline systems after check survey sign-off.
Can you measure from drawings rather than the built opening?
We can quote from drawings, but we manufacture from a check survey of the built opening, because real openings often differ slightly from the plans. Making a large made-to-measure door from drawings alone risks it not fitting. If a programme makes that unavoidable, any arrangement and who carries the risk would be agreed in writing first.
What structural opening size should my builder leave for sliding doors?
Your builder should leave the structural opening size we give in writing for your chosen door, which is the frame size plus a small fitting tolerance on each side and at the head. The exact figure depends on the system and the threshold detail. We confirm it from your drawings early, then check the built opening before the door is made.
Why does the steel beam matter for sliding doors?
The steel beam above an extension's sliding door matters because every beam bends a little under load, and a large sliding door needs a straight, level head to run freely. If the engineer knows a wide slider will sit under the beam, they can design for low deflection. Too much movement can make panels stiff or bind.