- Postcode district
- GU27
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Bordon, Midhurst, Godalming
- Building rules
- England
Sliding doors for extensions and garden rooms in Haslemere: what to know
The right door depends on the opening, the room and the way you use the garden. Here is how sliding doors for extensions tend to work out in practice:
Planning an extension in Haslemere? Send us the drawings before the steel is ordered, so the beam above the doors can be designed with the door in mind.
For a garden room at the bottom of a Haslemere garden, think about access: large glass panels need a clear route from the road to the site.
- We provide the structural opening size and fitting tolerances in writing, giving your builder a clear target and avoiding disputes about who measured what.
- Garden rooms benefit from the same approach, with a door sized to the frame and a header designed to carry the roof without pressing down on the door.
- Slimline aluminium systems with interlocks typically around 20–25 mm maximise the glass in a new rear wall, keeping the view as open as possible.
Light and sun in Haslemere
Sun angles matter for big glazed doors. Around Haslemere, midday sun reaches about 62° in summer and drops to about 15° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
How much do sliding doors for extensions cost in Haslemere?
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Haslemere home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £5,095–£6,195 |
| 4.8 m | 3 panels | £9,595–£11,695 |
| 6.0 m | 4 panels | £11,395–£13,895 |
See every size on the sliding doors for extensions page or try the guide price tool.
From survey to fitted door in Haslemere
Nothing is ordered until you sign off the surveyed specification. The door is made from the finished opening sizes (typically 6–8 weeks for slimline systems after check survey sign-off), and fitting usually takes 1–2 days, scheduled to the build programme. If you are in Bordon or Midhurst, the same process and prices apply.
Do you need approval in Haslemere?
In England, sliding doors in a new extension are covered by the extension's own Building Regulations application rather than a separate door notification. Approved Document L limits the glazed area: windows, roof windows and doors should not normally exceed 25% of the extension's floor area plus the area of any windows or doors lost to the extension, unless the extra glass is compensated for elsewhere. The doors must also meet the energy and safety glazing standards.
Finishes and extras for sliding doors for extensions
- Two-panel slimline. One sliding and one fixed panel, suiting openings up to around 3.6 m depending on the system.
- Corner opening. Sliding panels meeting at a corner with no post, for extensions open on two sides.
- Flush threshold. A level floor from inside to out, with a drainage channel set into the patio.
Questions about sliding doors for extensions in Haslemere
Do you fit sliding doors for extensions in Haslemere?
Yes. We survey and fit sliding doors for extensions in Haslemere and across Surrey, including nearby Bordon and Midhurst. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
How much do sliding doors for an extension cost?
Slimline sliding doors for an extension have a guide price of £7,795–£9,495 for a 3.6 m opening and £9,595–£11,695 for a 4.8 m opening, fitted, inc VAT at standard 2.1 m height. Taller doors, extra panels, special glass and flush thresholds move the price. Your written quote after the check survey fixes it.
Why does the steel beam matter for sliding doors?
The steel beam above an extension's sliding door matters because every beam bends a little under load, and a large sliding door needs a straight, level head to run freely. If the engineer knows a wide slider will sit under the beam, they can design for low deflection. Too much movement can make panels stiff or bind.
How do I get a level threshold in an extension?
A level or flush threshold in an extension needs the finished floor level inside to be set relative to the door sill and the outside paving before the screed goes down. Outside, a drainage channel is needed across the threshold so rain cannot run in. Our thresholds guide explains the options.