- Postcode district
- SA3
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Swansea, Gorseinon, Briton Ferry
- Building rules
- Wales
What sliding doors for extensions offer homes in Mumbles
Before you settle on a door type, it helps to know what sliding doors for extensions do well and what to check before you order.
Where an extension in Mumbles faces south or west, ask about solar-control glass, because a wall of glass in a single-storey room can overheat in summer.
For a garden room at the bottom of a Mumbles garden, think about access: large glass panels need a clear route from the road to the site.
- Setting the finished floor level before the screed goes down allows a low threshold, typically 15–25 mm, or a flush one with a drainage channel outside.
- Slimline aluminium systems with interlocks typically around 20–25 mm maximise the glass in a new rear wall, keeping the view as open as possible.
- Telling the engineer the door type and span early lets them design the beam above it to limit deflection, protecting the smooth running of large sliding panels.
Daylight in Mumbles and what it means for your glass
Because Mumbles sees long summer days (about 16 h 39 min) and short winter ones (about 7 h 49 min), the elevation your door faces makes a real difference. With the midday sun at about 15° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
How much do sliding doors for extensions cost in Mumbles?
These are guide prices for fitted doors, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 2 panels | £6,895–£8,395 |
| 4.0 m | 3 panels | £8,395–£10,195 |
| 4.8 m | 3 panels | £9,595–£11,695 |
See every size on the sliding doors for extensions page or try the guide price tool.
From survey to fitted door in Mumbles
Nothing is ordered until you sign off the surveyed specification. The door is made from the finished opening sizes (typically 6–8 weeks for slimline systems after check survey sign-off), and fitting usually takes 1–2 days, scheduled to the build programme. If you are in Swansea or Gorseinon, the same process and prices apply.
Do you need approval in Mumbles?
An extension in Wales needs Building Regulations approval, which covers its doors. The Welsh energy guidance limits the glazed area of an extension unless it is compensated for elsewhere, and glass in doors must be safety glazing.
Finishes and extras for sliding doors for extensions
- Corner opening. Sliding panels meeting at a corner with no post, for extensions open on two sides.
- Flush threshold. A level floor from inside to out, with a drainage channel set into the patio.
- Two-panel slimline. One sliding and one fixed panel, suiting openings up to around 3.6 m depending on the system.
Questions about sliding doors for extensions in Mumbles
Do I need building approval for sliding doors for extensions in Mumbles?
In Wales a replacement door must meet the Building Regulations as applied in Wales, arranged through a registered installer or Building Control. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
What sliding doors suit a garden room?
A garden room usually suits a two-panel or three-panel sliding door sized to the front of the building, with a header strong enough to carry the roof without pressing on the frame. Aluminium systems are a common choice because they are stable and need little maintenance. Glass with good insulation helps if the room will be used all year.
How much do sliding doors for an extension cost?
Slimline sliding doors for an extension have a guide price of £7,795–£9,495 for a 3.6 m opening and £9,595–£11,695 for a 4.8 m opening, fitted, inc VAT at standard 2.1 m height. Taller doors, extra panels, special glass and flush thresholds move the price. Your written quote after the check survey fixes it.
Can you measure from drawings rather than the built opening?
We can quote from drawings, but we manufacture from a check survey of the built opening, because real openings often differ slightly from the plans. Making a large made-to-measure door from drawings alone risks it not fitting. If a programme makes that unavoidable, any arrangement and who carries the risk would be agreed in writing first.