- Postcode district
- SP10
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Winchester, Amesbury, Newbury
- Building rules
- England
Is a slimline sliding door a good fit for your home in Andover?
Here is what to weigh up if you are considering slimline sliding doors for a home in Andover:
If you are building an extension in Andover, choosing slimline sliding doors before the floor is screeded allows the frame to be recessed for a near frameless finish.
If the only route to the back of an Andover property is through the house or a narrow side passage, the survey plans how large slimline panels will be carried in safely.
- Interlocks of around 20–25 mm leave the meeting point between panels as a thin line, so the view across the door is close to uninterrupted glass.
- High-load stainless steel rollers are sized for big glass units, so a panel weighing well over a hundred kilograms can still glide with a light push.
- Triple glazing is available on many slimline systems, bringing typical whole-door U-values down to around 0.8–1.1 W/m²K without bulking up the visible frame.
Daylight in Andover and what it means for your glass
At the latitude of Andover, the midday sun climbs to about 62° in late June but only about 15° in late December, when daylight lasts around 7 h 52 min against 16 h 35 min in midsummer. A south-facing slimline sliding door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
Slimline aluminium sliding doors prices in Andover
These are guide prices for fitted doors at a standard height, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £5,495–£6,795 |
| 3.0 m | 2 panels | £6,895–£8,395 |
| 6.0 m | 4 panels | £11,395–£13,895 |
See every size on the slimline sliding doors page or try the guide price tool.
Survey, manufacture and fitting around Andover
Surveys in the SP10 district are booked at a time that suits you. After you approve the quote, manufacture is typically 6–8 weeks from survey sign-off; on fitting day the old door comes out, the new frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1–2 days; allow 3–5 days of building work first if the opening is formed or widened.
Do you need approval in Andover?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Choosing the specification
- Handles. Slim flush pulls or a compact lever at the interlock, in matching or contrasting finishes.
- Concealed frame. Recess the outer frame into the floor, reveals and ceiling so almost no aluminium shows from inside.
- Threshold detail. A low threshold for straight replacements, or a flush floor-to-terrace finish with a drainage channel on extensions.
Questions about slimline sliding doors in Andover
Do you fit slimline sliding doors in Andover?
Yes. We survey and fit slimline sliding doors in Andover and across Hampshire, including nearby Winchester and Amesbury. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
Are slimline sliding doors warm in winter?
Slimline sliding doors are warm when they are thermally broken and well glazed, with typical whole-door U-values around 1.2–1.6 W/m²K double glazed and 0.8–1.1 W/m²K triple glazed, depending on the system. In England, a new or replacement door in an existing home with more than 60% glazing must reach 1.4 W/m²K or better. Wales, Scotland and Northern Ireland each have their own requirements, which are checked for your address.
What is the lead time for slimline sliding doors?
Slimline sliding doors typically take 6–8 weeks to manufacture after survey sign-off, because the profiles are precision-made and the glass units are large. Fitting typically takes 1–2 days. If the frame is being concealed in a new floor or ceiling, the recesses are formed during the building work, and a sub-frame may be set in place before the screed and plaster go on.
How slim is a slimline sliding door?
A slimline sliding door typically has a central interlock of around 20–25 mm, the narrow vertical section where the two panels meet. Standard aluminium sliders are considerably wider at this point. With the outer frame recessed into the floor, walls and ceiling, the interlock can be almost the only visible aluminium. Exact figures vary by system and are confirmed in your quote.