- Postcode district
- SP10
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £7,495 inc VAT
- Nearby
- Winchester, Amesbury, Newbury
- Building rules
- England
Is a lift and slide door a good fit for your home in Andover?
Before you settle on a door type, it helps to know what lift and slide doors do well and what to check before you order.
Planning a terrace door wider than about 4 m in Andover? Lift and slide hardware lets each panel be larger, so the opening needs fewer interlocks.
When you want a door left a hand's width open on a breezy day in Andover, a lowered lift and slide panel stays exactly where it is set.
- When the handle is turned down, the full weight of the panel compresses the seals, giving firmer resistance to draughts and driving rain than a brush-sealed slider.
- Deep, thermally broken frames carry thick triple glazed units where needed, with typical whole-door U-values around 0.8–1.1 W/m²K at that specification.
- A lowered panel sits on the frame rather than its rollers, so a part-open door will not drift in a gust and can be left a hand's width open for fresh air.
Planning glass for the light in Andover
At the latitude of Andover, the midday sun climbs to about 62° in late June but only about 15° in late December, when daylight lasts around 7 h 52 min against 16 h 35 min in midsummer. A south-facing lift and slide door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
Lift and slide doors prices in Andover
Guide prices are the same across Hampshire: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £7,495–£9,195 |
| 3.6 m | 2 panels | £9,695–£11,795 |
| 4.8 m | 3 panels | £11,795–£14,395 |
See every size on the lift and slide doors page or try the guide price tool.
From survey to fitted door in Andover
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 6–8 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1–2 days, plus 3–5 days of building work beforehand if the opening is new or widened for a door like this.
Rules for lift and slide doors in England
English Building Regulations treat a new or replacement external door in an existing home as a controlled fitting: it needs a U-value of 1.4 W/m²K or better (or Doorset Energy Rating band C) if more than 60% of it is glazed (Approved Document L), and safety glass in a critical location (Approved Document K). Compliance is arranged through a competent person scheme installer or a Building Control notification, so you get a certificate for your records.
Finishes and extras for lift and slide doors
- Glass. Double or triple glazed safety glass, with acoustic laminated or solar-control units for exposed or noisy sites.
- Material. Thermally broken aluminium, or timber and alu-clad timber lift and slide systems for a warmer interior look.
- Threshold. Standard, low or flush threshold, the flush version with a drainage channel set into the terrace.
Questions about lift and slide doors in Andover
Is the price different in Andover?
No. Guide prices for lift and slide doors are the same across mainland Britain, including Andover. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
How much is a lift and slide door?
A lift and slide door starts from a guide price of £7,495 for a 2.4 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 3.6 m door is a guide £9,695–£11,795, and a 6 m three-panel door is around £13,995. Height, triple glazing and finish move the figure within the range, and the final price is fixed in a written quote after survey.
Will I need Building Regulations approval for a large lift and slide door?
A large lift and slide door often needs Building Regulations approval for the structural work, because forming or widening an opening in England needs an application, structural calculations and usually a steel beam. The door itself is a controlled fitting, installed by a competent person scheme installer or notified to Building Control, with safety glazing throughout. Scotland needs a building warrant for a new or wider opening; Wales and Northern Ireland have their own rules.
Do lift and slide doors need servicing?
Lift and slide doors need light, regular care rather than heavy servicing: keep the track and drainage clear, wipe the gaskets with a damp cloth, and check the handle gear runs smoothly once a year. Because the seals are not dragged during opening, they wear slowly. If a panel ever drops unevenly, the rollers and lifting gear can be adjusted, and a worn gasket can be replaced on its own without changing the panel.