- Postcode district
- TA20
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Honiton, Taunton, Bridport
- Building rules
- England
Why choose slimline sliding doors in Chard?
The right door depends on the opening, the room and the way you use the garden. Here is how slimline sliding doors tend to work out in practice:
If the only route to the back of a Chard property is through the house or a narrow side passage, the survey plans how large slimline panels will be carried in safely.
If you are building an extension in Chard, choosing slimline sliding doors before the floor is screeded allows the frame to be recessed for a near frameless finish.
- Triple glazing is available on many slimline systems, bringing typical whole-door U-values down to around 0.8–1.1 W/m²K without bulking up the visible frame.
- Panels of up to around 2.5–3 m wide mean a wide opening needs fewer sections, and so fewer interlocks crossing the view.
- Profiles stay just as narrow on tall panels as on standard-height ones, keeping the sightlines consistent from floor to ceiling.
Daylight in Chard and what it means for your glass
In Chard the shortest day has roughly 7 h 56 min of daylight and the longest about 16 h 31 min. The noon sun sits near 16° above the horizon in winter and 63° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
How much do slimline sliding doors cost in Chard?
Guide prices are the same across Somerset: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £5,095–£6,195 |
| 2.1 m | 2 panels | £5,495–£6,795 |
| 3.0 m | 2 panels | £6,895–£8,395 |
See every size on the slimline sliding doors page or try the guide price tool.
How fitting works in Chard
Surveys in the TA20 district are booked at a time that suits you. After you approve the quote, manufacture is typically 6–8 weeks from survey sign-off; on fitting day the old door comes out, the new frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1–2 days; allow 3–5 days of building work first if the opening is formed or widened.
Rules for slimline sliding doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Specification choices for slimline sliding doors in Chard
- Concealed frame. Recess the outer frame into the floor, reveals and ceiling so almost no aluminium shows from inside.
- Colours. Black, anthracite grey, bronze-effect or a special RAL powder coat, with dual colour available.
- Threshold detail. A low threshold for straight replacements, or a flush floor-to-terrace finish with a drainage channel on extensions.
Questions about slimline sliding doors in Chard
How soon can you survey in Chard?
Surveys in the TA20 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 6–8 weeks from survey sign-off.
Are slimline sliding doors warm in winter?
Slimline sliding doors are warm when they are thermally broken and well glazed, with typical whole-door U-values around 1.2–1.6 W/m²K double glazed and 0.8–1.1 W/m²K triple glazed, depending on the system. In England, a new or replacement door in an existing home with more than 60% glazing must reach 1.4 W/m²K or better. Wales, Scotland and Northern Ireland each have their own requirements, which are checked for your address.
How big can slimline sliding door panels be?
Slimline sliding door panels are typically up to about 2.5–3 m wide and up to around 3 m high, depending on the system and the weight of the glass. Our slimline range covers overall widths from about 1.8 m to 6 m in two to four panels. Bigger panels mean fewer interlocks, but they are heavy, so access for delivery and fitting is checked at survey.
What is the lead time for slimline sliding doors?
Slimline sliding doors typically take 6–8 weeks to manufacture after survey sign-off, because the profiles are precision-made and the glass units are large. Fitting typically takes 1–2 days. If the frame is being concealed in a new floor or ceiling, the recesses are formed during the building work, and a sub-frame may be set in place before the screed and plaster go on.