- Postcode district
- TA20
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 8–10 weeks from survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Honiton, Taunton, Bridport
- Building rules
- England
Timber and alu-clad sliding doors in Chard: what to know
The right door depends on the opening, the room and the way you use the garden. Here is how timber and alu-clad sliding doors tend to work out in practice:
Oak floors, exposed beams or a timber kitchen in your Chard home? Matching the inside finish of the door ties the new glazing into the room.
For a listed building or a house in a conservation area in Chard, check with the local planning authority before choosing any new door; timber frames are often closer in character to the original joinery.
- Scratches and dents on internal timber faces can usually be sanded and refinished locally, rather than needing a whole panel replaced.
- A timber sliding door sits comfortably beside brick, stone, render or weatherboarding, which helps where a modern metal frame would look out of character.
- An alu-clad exterior shields the wood from rain and sunlight, so the outside needs only washing while the inside keeps a natural timber finish.
Sunlight, glass and orientation in Chard
Daylight in Chard runs from about 7 h 56 min in December to 16 h 31 min in June, with the noon sun at roughly 16° and 63° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
How much do timber and alu-clad sliding doors cost in Chard?
Pricing is transparent and does not change because you are in Chard. The ranges below cover a standard-height door, fitted, with VAT; options are itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £5,595–£6,795 |
| 3.0 m | 2 panels | £7,495–£9,095 |
| 4.8 m | 4 panels | £10,395–£12,595 |
See every size on the timber and alu-clad sliding doors page or try the guide price tool.
How fitting works in Chard
Surveys in the TA20 district are booked at a time that suits you. After you approve the quote, manufacture is typically 8–10 weeks from survey sign-off; on fitting day the old door comes out, the new frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1 day for a two-panel swap; 1–2 days for larger doors.
Rules for timber and alu-clad sliding doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Specification choices for timber and alu-clad sliding doors in Chard
- Alu-cladding. A powder-coated aluminium outer shell in a standard or RAL colour, with timber left on show inside.
- Glass. Double or triple glazed safety glass, with slim glazing bars available for a period look.
- Sliding hardware. Inline rollers on smaller doors, or lift and slide gear for larger and heavier panels.
Questions about timber and alu-clad sliding doors in Chard
Is the price different in Chard?
No. Guide prices for timber and alu-clad sliding doors are the same across mainland Britain, including Chard. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
Can I fit timber sliding doors to a listed building or in a conservation area?
Timber sliding doors can suit listed buildings and conservation areas, but listed buildings and properties under an Article 4 direction may need consent before any door is changed, so check with your local planning authority first. In England, replacing doors on an ordinary house with similar-looking ones is usually permitted development. Wales, Scotland and Northern Ireland have their own planning rules.
How big can a timber sliding door be?
A timber sliding door in our range is typically about 1.5 m to 4.8 m wide overall, in two to four panels, at standard 2.1 m height or taller on request. Individual panel sizes depend on the system and glass weight; larger panels usually move to lift and slide hardware so they stay easy to open. Sizes are confirmed after survey.
What is the difference between timber and alu-clad sliding doors?
The difference is the outside face: a timber sliding door is wood inside and out, while an alu-clad door has a powder-coated aluminium shell fixed over the exterior timber. Alu-clad needs only washing outside and comes in any RAL colour; all-timber needs periodic re-coating but keeps a natural wood look on both faces. The inside is timber either way.