Are timber and alu-clad sliding doors right for homes in Somerset?
The right door depends on the opening, the room and the way you use the garden. Here is how timber and alu-clad sliding doors tend to work out in practice:
If your Somerset home is a period property or a barn conversion, timber and alu-clad sliding doors can bring in more light without the modern look of a metal frame.
For a listed building or a house in a conservation area in Somerset, check with the local planning authority before choosing any new door; timber frames are often closer in character to the original joinery.
- Scratches and dents on internal timber faces can usually be sanded and refinished locally, rather than needing a whole panel replaced.
- A timber sliding door sits comfortably beside brick, stone, render or weatherboarding, which helps where a modern metal frame would look out of character.
- Engineered timber is laminated from several layers with the grain opposed, so frames resist the twisting and warping that solid timber can suffer as the seasons change.
Guide prices for timber and alu-clad sliding doors in Somerset
Guide prices are the same across Somerset: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £5,995–£7,395 |
| 2.4 m | 2 panels | £6,495–£7,995 |
| 3.0 m | 2 panels | £7,495–£9,095 |
| 4.8 m | 4 panels | £10,395–£12,595 |
Every size is on the timber and alu-clad sliding doors page.
Daylight and glass in Somerset
Sun angles matter for big glazed doors. Around Somerset, midday sun reaches about 62° in summer and drops to about 15° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
Towns we cover in Somerset
We survey and fit timber and alu-clad sliding doors in 17 towns across Somerset, including the BA11, BA16, BA2, BA20, BA4, BA5 postcode districts.
Approvals in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Questions about timber and alu-clad sliding doors in Somerset
Is the price different in Somerset?
No. Guide prices for timber and alu-clad sliding doors are the same across mainland Britain, including Somerset. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
What is the difference between timber and alu-clad sliding doors?
The difference is the outside face: a timber sliding door is wood inside and out, while an alu-clad door has a powder-coated aluminium shell fixed over the exterior timber. Alu-clad needs only washing outside and comes in any RAL colour; all-timber needs periodic re-coating but keeps a natural wood look on both faces. The inside is timber either way.
How often do timber sliding doors need treating?
Timber sliding doors need the outside re-coated every few years, depending on how exposed the elevation is and which finish system is used; doors facing full sun or coastal weather need attention soonest. Alu-clad doors avoid this, needing only an occasional wash outside. Inside, timber only needs wiping and an occasional refresh of the lacquer or oil, and a clean track protects the rollers.
How long do timber sliding doors take to make?
Timber and alu-clad sliding doors typically take 8–10 weeks to make after survey sign-off, longer than metal or uPVC, because each door is joinery-made, factory finished and allowed to cure before delivery. Fitting typically takes 1 day for a two-panel swap and 1–2 days for larger doors. These are typical timescales, confirmed once your order is placed.