- Postcode district
- BA2
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 8–10 weeks from survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Bradford-on-Avon, Keynsham, Trowbridge
- Building rules
- England
Timber and alu-clad sliding doors in Bath: what to know
These are the points a surveyor will go through with you when you choose timber and alu-clad sliding doors for a home in Bath:
For a listed building or a house in a conservation area in Bath, check with the local planning authority before choosing any new door; timber frames are often closer in character to the original joinery.
Where the back of a Bath home faces south and takes full sun, choosing alu-clad keeps the timber protected and cuts out the re-coating that strong sunlight makes necessary.
- Many timber systems use lift and slide hardware, letting large, heavy panels glide easily and then settle onto compressed seals for a tight closure.
- An alu-clad exterior shields the wood from rain and sunlight, so the outside needs only washing while the inside keeps a natural timber finish.
- The inside face can be finished to match existing oak floors, stair parts or window boards, so the new door feels part of the room rather than an addition.
Daylight in Bath and what it means for your glass
Because Bath sees long summer days (about 16 h 37 min) and short winter ones (about 7 h 51 min), the elevation your door faces makes a real difference. With the midday sun at about 15° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
How much do timber and alu-clad sliding doors cost in Bath?
Pricing is transparent and does not change because you are in Bath. The ranges below cover a standard-height door, fitted, with VAT; options are itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £6,495–£7,995 |
| 3.0 m | 2 panels | £7,495–£9,095 |
| 4.8 m | 4 panels | £10,395–£12,595 |
See every size on the timber and alu-clad sliding doors page or try the guide price tool.
Survey, manufacture and fitting around Bath
We plan the job around your home in Bath: survey first, then a written quote, then manufacture (typically 8–10 weeks from survey sign-off). The fitting itself usually takes 1 day for a two-panel swap; 1–2 days for larger doors. If you are in Bradford-on-Avon or Keynsham, the same process and prices apply.
Do you need approval in Bath?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Finishes and extras for timber and alu-clad sliding doors
- Handles. Traditional or contemporary handles in bronze, black, satin chrome or brass-effect finishes.
- Interior finish. Clear lacquer, a wood stain or a painted colour, chosen to match floors, beams or kitchen units.
- Sliding hardware. Inline rollers on smaller doors, or lift and slide gear for larger and heavier panels.
Questions about timber and alu-clad sliding doors in Bath
Do you fit timber and alu-clad sliding doors in Bath?
Yes. We survey and fit timber and alu-clad sliding doors in Bath and across Somerset, including nearby Bradford-on-Avon and Keynsham. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
Are timber sliding doors energy efficient?
Timber sliding doors are energy efficient because wood insulates naturally, and engineered timber systems typically achieve whole-door U-values comparable with good thermally broken aluminium, depending on the glass. In England, a new or replacement door in an existing home with more than 60% glazing must reach 1.4 W/m²K or better, and the glazing is specified to meet that. Wales, Scotland and Northern Ireland set their own energy rules.
How big can a timber sliding door be?
A timber sliding door in our range is typically about 1.5 m to 4.8 m wide overall, in two to four panels, at standard 2.1 m height or taller on request. Individual panel sizes depend on the system and glass weight; larger panels usually move to lift and slide hardware so they stay easy to open. Sizes are confirmed after survey.
How long do timber sliding doors take to make?
Timber and alu-clad sliding doors typically take 8–10 weeks to make after survey sign-off, longer than metal or uPVC, because each door is joinery-made, factory finished and allowed to cure before delivery. Fitting typically takes 1 day for a two-panel swap and 1–2 days for larger doors. These are typical timescales, confirmed once your order is placed.