Made-to-measure sliding doors, supplied and fitted· Free survey for new doors
0800 088 6248
Tilt and slide doors
Tilt and slide patio doors · BT62

Tilt and slide patio doors in Portadown

Planning tilt and slide doors for a home in Portadown? We measure, make and fit to your opening across County Armagh, with the building control requirements checked with your district council.

Postcode district
BT62
Survey
Free, area covered by arrangement
Typical lead time
Typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off
Guide price
From £1,995 inc VAT
Nearby
Craigavon, Tandragee, Lurgan
Building rules
Northern Ireland

Tilt and slide patio doors in Portadown: what to know

A few practical points decide whether tilt and slide doors suit a particular room and opening:

For a flat in Portadown, check your lease or title deeds and speak to the managing agent, factor or other owners before replacing a balcony door, since flats can need consent that houses do not.

Young children at home in Portadown? A sliding restrictor, available on many systems, limits how far the sash opens while still letting air in.

  • A tilt and slide door fits the same kind of opening as an ordinary patio door, so a draughty older slider can often be swapped without building work.
  • A sliding restrictor, available on many systems, limits how far the sash can open, which is useful for upstairs balconies and homes with young children.
  • When closed, the sash is drawn back into the frame and presses onto gaskets on all four edges, giving a window-like seal against draughts and driving rain.

Daylight in Portadown and what it means for your glass

June 59°Dec 12°

Sun angles matter for big glazed doors. Around Portadown, midday sun reaches about 59° in summer and drops to about 12° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.

Guide prices for tilt and slide doors in Portadown

Use these guide prices to budget. They include VAT, fitting and taking away an old door of a similar size. Taller doors, triple glazing and dual colour add to the figure — the online tool shows how much.

Guide prices for tilt and slide doors in Portadown
Overall widthTypical panelsGuide price (fitted, inc VAT)
1.8 m2 panels£2,195–£2,695
2.1 m2 panels£2,395–£2,895
3.0 m2 panels£2,995–£3,595

See every size on the tilt and slide doors page or try the guide price tool.

Survey, manufacture and fitting around Portadown

Surveys in the BT62 district are booked at a time that suits you. After you approve the quote, manufacture is typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off; on fitting day the old door comes out, the new frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1 day for a straight swap in an existing opening. Portadown is in an area we cover by arrangement: the survey is still free, and survey dates, delivery and any travel cost for delivery and fitting are confirmed in your quote before you order.

Do you need approval in Portadown?

In Northern Ireland, the Building Regulations (Northern Ireland) apply through your district council's building control service, with energy guidance in Technical Booklet F1. Work in Northern Ireland is by arrangement, and we confirm the approval route for your property at survey.

Choosing the specification

  • Sash side. A left or right opening sash, chosen to suit furniture, the patio layout and the way you walk out.
  • Glass. Toughened or laminated double glazing, or triple glazing for extra warmth and sound reduction.
  • Handle. An inside lever handle with a key lock, plus an outside pull handle or cylinder if the door is used from the garden.

Questions about tilt and slide doors in Portadown

Is the price different in Portadown?

The door price is the same as anywhere else. Because Portadown is covered by arrangement, any travel cost for delivery and fitting is shown in your quote before you order; the survey itself is free.

How long does a tilt and slide door take?

A tilt and slide door typically takes 2–4 weeks to make in uPVC and 4–6 weeks in aluminium, from survey sign-off. Fitting typically takes 1 day for a straight swap in an existing opening, including removing the old door and making good. These are typical times rather than fixed promises, and the date is confirmed once the order is placed.

How much does a tilt and slide patio door cost?

Tilt and slide patio doors start from a guide price of £1,995 for a 1.5 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 2.1 m door is a guide £2,395–£2,895, and a 3 m door is around £2,995. Aluminium frames, colour and triple glazing move the figure up, and the final price is fixed in a written quote after survey.

Is a tilt and slide door safe to leave tilted?

A tilt and slide door in the tilt position opens only a narrow gap at the top, so it is far harder to get through than an open door, but it is not locked. Close and lock the sash whenever the house is empty. When closed, perimeter locking points hold the sash like a window, and systems are available tested to PAS 24.

Ready to price your sliding doors?

Use the guide price tool, or book a free survey and fixed written quote.

CallGet a quote