Made-to-measure sliding doors, supplied and fitted· Free survey for new doors
0800 088 6248
Tilt and slide doors
Tilt and slide patio doors · BT71

Tilt and slide patio doors in Dungannon

Looking at tilt and slide doors in Dungannon? Every door is built to the measured size of your opening, fitted by installers we appoint and manage under our contract, and priced in a written quote after a free survey.

Postcode district
BT71
Survey
Free, area covered by arrangement
Typical lead time
Typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off
Guide price
From £1,995 inc VAT
Nearby
Coalisland, Cookstown, Armagh
Building rules
Northern Ireland

Why choose tilt and slide doors in Dungannon?

The right door depends on the opening, the room and the way you use the garden. Here is how tilt and slide doors tend to work out in practice:

If a bedroom in your Dungannon home opens onto a balcony or garden, the tilt position on tilt and slide doors lets in fresh air at night without leaving the door open.

Is the opening in your Dungannon home wider than about 3 m? If so, tilt and slide hardware will not carry a sash that size, and a lift and slide door is worth comparing.

  • Tilting the sash lets steam and cooking smells out of a kitchen-diner in seconds, without the security worry of a door left wide open.
  • A tilt and slide door fits the same kind of opening as an ordinary patio door, so a draughty older slider can often be swapped without building work.
  • The sash moves forward and slides parallel in front of the fixed pane, so nothing swings into the room and the floor beside the door stays usable.

Planning glass for the light in Dungannon

June 59°Dec 12°

In Dungannon the shortest day has roughly 7 h 16 min of daylight and the longest about 17 h 15 min. The noon sun sits near 12° above the horizon in winter and 59° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.

What should you budget for tilt and slide doors in Dungannon?

Pricing is transparent and does not change because you are in Dungannon. The ranges below cover a standard-height door, fitted, with VAT; options are itemised in your quote.

What should you budget for tilt and slide doors in Dungannon?
Overall widthTypical panelsGuide price (fitted, inc VAT)
2.1 m2 panels£2,395–£2,895
2.4 m2 panels£2,595–£3,195
3.0 m2 panels£2,995–£3,595

See every size on the tilt and slide doors page or try the guide price tool.

What happens when you order tilt and slide doors in Dungannon?

A surveyor visits your Dungannon home to measure the structural opening, check levels and the lintel, and talk through glass and finish. Once you confirm the written specification, the door is made to measure — typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off — and fitting usually takes 1 day for a straight swap in an existing opening. We also cover Coalisland (6 km north-east) and Cookstown (16 km north). Dungannon is in an area we cover by arrangement: the survey is still free, and survey dates, delivery and any travel cost for delivery and fitting are confirmed in your quote before you order.

Do you need approval in Dungannon?

Building control in Northern Ireland is run by district councils under the Building Regulations (Northern Ireland). We take on work in Northern Ireland by arrangement and confirm what approval your door needs before anything is ordered.

Which options matter for tilt and slide doors?

  • Handle. An inside lever handle with a key lock, plus an outside pull handle or cylinder if the door is used from the garden.
  • Colours. White, woodgrain or coloured foils on uPVC; standard or RAL powder coats on aluminium.
  • Sash side. A left or right opening sash, chosen to suit furniture, the patio layout and the way you walk out.

Questions about tilt and slide doors in Dungannon

Do I need building approval for tilt and slide doors in Dungannon?

In Northern Ireland the Building Regulations (Northern Ireland) apply through district council building control; work there is by arrangement. We confirm the right route for your property at survey, so the paperwork is in place before fitting.

How long does a tilt and slide door take?

A tilt and slide door typically takes 2–4 weeks to make in uPVC and 4–6 weeks in aluminium, from survey sign-off. Fitting typically takes 1 day for a straight swap in an existing opening, including removing the old door and making good. These are typical times rather than fixed promises, and the date is confirmed once the order is placed.

Is a tilt and slide door safe to leave tilted?

A tilt and slide door in the tilt position opens only a narrow gap at the top, so it is far harder to get through than an open door, but it is not locked. Close and lock the sash whenever the house is empty. When closed, perimeter locking points hold the sash like a window, and systems are available tested to PAS 24.

What is a tilt and slide door?

A tilt and slide door is a patio door whose opening sash can either tilt inward at the top for ventilation, or move forward and slide parallel across the fixed panel. The handle selects the mode. When closed, the sash is pulled back into the frame and sealed on all four sides, so it behaves more like a large window than a conventional slider.

Ready to price your sliding doors?

Use the guide price tool, or book a free survey and fixed written quote.

CallGet a quote