- Postcode district
- BT60
- Survey
- Free, area covered by arrangement
- Typical lead time
- Typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off
- Guide price
- From £1,995 inc VAT
- Nearby
- Armagh, Tandragee, Newry
- Building rules
- Northern Ireland
Tilt and slide patio doors in Keady: what to know
These are the points a surveyor will go through with you when you choose tilt and slide doors for a home in Keady:
A kitchen in Keady that steams up while you cook can be aired by tilting the sash, which is quicker than reaching across the worktop to a window.
Is the opening in your Keady home wider than about 3 m? If so, tilt and slide hardware will not carry a sash that size, and a lift and slide door is worth comparing.
- The tilt position opens a narrow gap at the top of the sash while the hardware holds it in place, so a room can be aired without leaving a door open.
- Locking points engage around the whole perimeter of the sash, much like a window, rather than only along the closing edge.
- A tilt and slide door fits the same kind of opening as an ordinary patio door, so a draughty older slider can often be swapped without building work.
Sunlight, glass and orientation in Keady
Sun angles matter for big glazed doors. Around Keady, midday sun reaches about 59° in summer and drops to about 12° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
Guide prices for tilt and slide doors in Keady
Guide prices are the same across County Armagh: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £1,995–£2,495 |
| 2.1 m | 2 panels | £2,395–£2,895 |
| 2.4 m | 2 panels | £2,595–£3,195 |
See every size on the tilt and slide doors page or try the guide price tool.
What happens when you order tilt and slide doors in Keady?
Surveys in the BT60 district are booked at a time that suits you. After you approve the quote, manufacture is typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off; on fitting day the old door comes out, the new frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1 day for a straight swap in an existing opening. Keady is in an area we cover by arrangement: the survey is still free, and survey dates, delivery and any travel cost for delivery and fitting are confirmed in your quote before you order.
Rules for tilt and slide doors in Northern Ireland
In Northern Ireland, the Building Regulations (Northern Ireland) apply through your district council's building control service, with energy guidance in Technical Booklet F1. Work in Northern Ireland is by arrangement, and we confirm the approval route for your property at survey.
Options to consider for your tilt and slide door
- Glass. Toughened or laminated double glazing, or triple glazing for extra warmth and sound reduction.
- Handle. An inside lever handle with a key lock, plus an outside pull handle or cylinder if the door is used from the garden.
- Material. uPVC for a lower price and shorter lead time, or aluminium for slimmer frames and powder-coated colours.
Questions about tilt and slide doors in Keady
Is the price different in Keady?
The door price is the same as anywhere else. Because Keady is covered by arrangement, any travel cost for delivery and fitting is shown in your quote before you order; the survey itself is free.
How long does a tilt and slide door take?
A tilt and slide door typically takes 2–4 weeks to make in uPVC and 4–6 weeks in aluminium, from survey sign-off. Fitting typically takes 1 day for a straight swap in an existing opening, including removing the old door and making good. These are typical times rather than fixed promises, and the date is confirmed once the order is placed.
How wide can a tilt and slide door be?
A tilt and slide door in our range is typically about 1.5 m to 3 m wide overall, with one opening sash and one fixed panel. The sash size is set by the hardware's weight limit, which is lower than for inline or lift and slide systems. If you need a wider opening, a standard aluminium slider or a lift and slide door is the usual alternative.
How much does a tilt and slide patio door cost?
Tilt and slide patio doors start from a guide price of £1,995 for a 1.5 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 2.1 m door is a guide £2,395–£2,895, and a 3 m door is around £2,995. Aluminium frames, colour and triple glazing move the figure up, and the final price is fixed in a written quote after survey.