- Postcode district
- TQ3
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off
- Guide price
- From £1,995 inc VAT
- Nearby
- Torquay, Totnes, Dartmouth
- Building rules
- England
Why choose tilt and slide doors in Paignton?
Before you settle on a door type, it helps to know what tilt and slide doors do well and what to check before you order.
Young children at home in Paignton? A sliding restrictor, available on many systems, limits how far the sash opens while still letting air in.
A kitchen in Paignton that steams up while you cook can be aired by tilting the sash, which is quicker than reaching across the worktop to a window.
- The sash moves forward and slides parallel in front of the fixed pane, so nothing swings into the room and the floor beside the door stays usable.
- A tilt and slide door fits the same kind of opening as an ordinary patio door, so a draughty older slider can often be swapped without building work.
- The tilt position opens a narrow gap at the top of the sash while the hardware holds it in place, so a room can be aired without leaving a door open.
Sunlight, glass and orientation in Paignton
The midday sun over Paignton ranges from about 16° at the winter solstice to about 63° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
Tilt and slide patio doors prices in Paignton
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Paignton home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £1,995–£2,495 |
| 2.1 m | 2 panels | £2,395–£2,895 |
| 2.4 m | 2 panels | £2,595–£3,195 |
See every size on the tilt and slide doors page or try the guide price tool.
What happens when you order tilt and slide doors in Paignton?
We plan the job around your home in Paignton: survey first, then a written quote, then manufacture (typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off). The fitting itself usually takes 1 day for a straight swap in an existing opening. If you are in Torquay or Totnes, the same process and prices apply.
Rules for tilt and slide doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Which options matter for tilt and slide doors?
- Glass. Toughened or laminated double glazing, or triple glazing for extra warmth and sound reduction.
- Material. uPVC for a lower price and shorter lead time, or aluminium for slimmer frames and powder-coated colours.
- Sash side. A left or right opening sash, chosen to suit furniture, the patio layout and the way you walk out.
Questions about tilt and slide doors in Paignton
Is the price different in Paignton?
No. Guide prices for tilt and slide doors are the same across mainland Britain, including Paignton. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
Is a tilt and slide door safe to leave tilted?
A tilt and slide door in the tilt position opens only a narrow gap at the top, so it is far harder to get through than an open door, but it is not locked. Close and lock the sash whenever the house is empty. When closed, perimeter locking points hold the sash like a window, and systems are available tested to PAS 24.
How do I maintain a tilt and slide door?
Maintaining a tilt and slide door means keeping the bottom track and drainage clear, wiping the gaskets with a damp cloth and lightly oiling the moving hardware points once a year. If the sash starts to catch or the handle feels stiff, the hinges and keeps can be adjusted rather than replaced. Gaskets that have flattened after many years can be renewed on their own, restoring the seal without a new sash.
How wide can a tilt and slide door be?
A tilt and slide door in our range is typically about 1.5 m to 3 m wide overall, with one opening sash and one fixed panel. The sash size is set by the hardware's weight limit, which is lower than for inline or lift and slide systems. If you need a wider opening, a standard aluminium slider or a lift and slide door is the usual alternative.