- Postcode district
- PL1
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off
- Guide price
- From £1,995 inc VAT
- Nearby
- Saltash, Tavistock, Liskeard
- Building rules
- England
Is a tilt and slide door a good fit for your home in Plymouth?
These are the points a surveyor will go through with you when you choose tilt and slide doors for a home in Plymouth:
Is the opening in your Plymouth home wider than about 3 m? If so, tilt and slide hardware will not carry a sash that size, and a lift and slide door is worth comparing.
If a bedroom in your Plymouth home opens onto a balcony or garden, the tilt position on tilt and slide doors lets in fresh air at night without leaving the door open.
- Made in both uPVC and aluminium, in white, foiled or powder-coated colours, a tilt and slide door can match the windows around it.
- Locking points engage around the whole perimeter of the sash, much like a window, rather than only along the closing edge.
- The sash moves forward and slides parallel in front of the fixed pane, so nothing swings into the room and the floor beside the door stays usable.
Planning glass for the light in Plymouth
Sun angles matter for big glazed doors. Around Plymouth, midday sun reaches about 63° in summer and drops to about 16° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
How much do tilt and slide doors cost in Plymouth?
Guide prices are the same across Devon: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £2,195–£2,695 |
| 2.1 m | 2 panels | £2,395–£2,895 |
| 2.4 m | 2 panels | £2,595–£3,195 |
See every size on the tilt and slide doors page or try the guide price tool.
Survey, manufacture and fitting around Plymouth
Surveys in the PL1 district are booked at a time that suits you. After you approve the quote, manufacture is typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off; on fitting day the old door comes out, the new frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1 day for a straight swap in an existing opening.
Rules for tilt and slide doors in England
English Building Regulations treat a new or replacement external door in an existing home as a controlled fitting: it needs a U-value of 1.4 W/m²K or better (or Doorset Energy Rating band C) if more than 60% of it is glazed (Approved Document L), and safety glass in a critical location (Approved Document K). Compliance is arranged through a competent person scheme installer or a Building Control notification, so you get a certificate for your records.
Options to consider for your tilt and slide door
- Handle. An inside lever handle with a key lock, plus an outside pull handle or cylinder if the door is used from the garden.
- Sash side. A left or right opening sash, chosen to suit furniture, the patio layout and the way you walk out.
- Glass. Toughened or laminated double glazing, or triple glazing for extra warmth and sound reduction.
Questions about tilt and slide doors in Plymouth
How soon can you survey in Plymouth?
Surveys in the PL1 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off.
Do I need Building Regulations approval for a tilt and slide door?
A tilt and slide door replacing an existing door in England is a controlled fitting, so it must be fitted by an installer registered with a competent person scheme or notified to Building Control, and the glass must be safety glazing to BS EN 12600. Planning permission is not usually needed on a house when the door looks similar. Flats and listed buildings may need consent, and Wales, Scotland and Northern Ireland have their own rules.
How much does a tilt and slide patio door cost?
Tilt and slide patio doors start from a guide price of £1,995 for a 1.5 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 2.1 m door is a guide £2,395–£2,895, and a 3 m door is around £2,995. Aluminium frames, colour and triple glazing move the figure up, and the final price is fixed in a written quote after survey.
How wide can a tilt and slide door be?
A tilt and slide door in our range is typically about 1.5 m to 3 m wide overall, with one opening sash and one fixed panel. The sash size is set by the hardware's weight limit, which is lower than for inline or lift and slide systems. If you need a wider opening, a standard aluminium slider or a lift and slide door is the usual alternative.