- Postcode district
- SA31
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off
- Guide price
- From £1,995 inc VAT
- Nearby
- Llanelli, Ammanford, Gorseinon
- Building rules
- Wales
Is a tilt and slide door a good fit for your home in Carmarthen?
The right door depends on the opening, the room and the way you use the garden. Here is how tilt and slide doors tend to work out in practice:
Young children at home in Carmarthen? A sliding restrictor, available on many systems, limits how far the sash opens while still letting air in.
A kitchen in Carmarthen that steams up while you cook can be aired by tilting the sash, which is quicker than reaching across the worktop to a window.
- Made in both uPVC and aluminium, in white, foiled or powder-coated colours, a tilt and slide door can match the windows around it.
- Tilting the sash lets steam and cooking smells out of a kitchen-diner in seconds, without the security worry of a door left wide open.
- A tilt and slide door fits the same kind of opening as an ordinary patio door, so a draughty older slider can often be swapped without building work.
How much sun will a door in Carmarthen get?
The midday sun over Carmarthen ranges from about 15° at the winter solstice to about 62° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
What should you budget for tilt and slide doors in Carmarthen?
Use these guide prices to budget. They include VAT, fitting and taking away an old door of a similar size. Taller doors, triple glazing and dual colour add to the figure — the online tool shows how much.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £2,195–£2,695 |
| 2.1 m | 2 panels | £2,395–£2,895 |
| 3.0 m | 2 panels | £2,995–£3,595 |
See every size on the tilt and slide doors page or try the guide price tool.
From survey to fitted door in Carmarthen
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a straight swap in an existing opening for a door like this.
Do you need approval in Carmarthen?
Wales sets its own Building Regulations guidance, including Approved Document L (Wales) for energy. A replacement sliding door must meet those requirements and use safety glass, and we arrange compliance through a registered installer or the local Building Control service.
Specification choices for tilt and slide doors in Carmarthen
- Colours. White, woodgrain or coloured foils on uPVC; standard or RAL powder coats on aluminium.
- Restrictor. A sliding restrictor on many systems to limit the opening for upstairs rooms or homes with young children.
- Handle. An inside lever handle with a key lock, plus an outside pull handle or cylinder if the door is used from the garden.
Questions about tilt and slide doors in Carmarthen
How soon can you survey in Carmarthen?
Surveys in the SA31 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off.
How much does a tilt and slide patio door cost?
Tilt and slide patio doors start from a guide price of £1,995 for a 1.5 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 2.1 m door is a guide £2,395–£2,895, and a 3 m door is around £2,995. Aluminium frames, colour and triple glazing move the figure up, and the final price is fixed in a written quote after survey.
How wide can a tilt and slide door be?
A tilt and slide door in our range is typically about 1.5 m to 3 m wide overall, with one opening sash and one fixed panel. The sash size is set by the hardware's weight limit, which is lower than for inline or lift and slide systems. If you need a wider opening, a standard aluminium slider or a lift and slide door is the usual alternative.
How long does a tilt and slide door take?
A tilt and slide door typically takes 2–4 weeks to make in uPVC and 4–6 weeks in aluminium, from survey sign-off. Fitting typically takes 1 day for a straight swap in an existing opening, including removing the old door and making good. These are typical times rather than fixed promises, and the date is confirmed once the order is placed.