Made-to-measure sliding doors, supplied and fitted· Free survey for new doors
0800 088 6248
Tilt and slide doors
Tilt and slide patio doors · PA4

Tilt and slide patio doors in Renfrew

Looking at tilt and slide doors in Renfrew? Every door is built to the measured size of your opening, fitted by installers we appoint and manage under our contract, and priced in a written quote after a free survey.

Postcode district
PA4
Survey
Free for new and replacement doors
Typical lead time
Typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off
Guide price
From £1,995 inc VAT
Nearby
Clydebank, Erskine, Paisley
Building rules
Scotland

Is a tilt and slide door a good fit for your home in Renfrew?

These are the points a surveyor will go through with you when you choose tilt and slide doors for a home in Renfrew:

A kitchen in Renfrew that steams up while you cook can be aired by tilting the sash, which is quicker than reaching across the worktop to a window.

Young children at home in Renfrew? A sliding restrictor, available on many systems, limits how far the sash opens while still letting air in.

  • When closed, the sash is drawn back into the frame and presses onto gaskets on all four edges, giving a window-like seal against draughts and driving rain.
  • The sash moves forward and slides parallel in front of the fixed pane, so nothing swings into the room and the floor beside the door stays usable.
  • A tilt and slide door fits the same kind of opening as an ordinary patio door, so a draughty older slider can often be swapped without building work.

Planning glass for the light in Renfrew

June 58°Dec 11°

Daylight in Renfrew runs from about 6 h 58 min in December to 17 h 35 min in June, with the noon sun at roughly 11° and 58° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.

How much do tilt and slide doors cost in Renfrew?

Pricing is transparent and does not change because you are in Renfrew. The ranges below cover a standard-height door, fitted, with VAT; options are itemised in your quote.

How much do tilt and slide doors cost in Renfrew?
Overall widthTypical panelsGuide price (fitted, inc VAT)
1.5 m2 panels£1,995–£2,495
1.8 m2 panels£2,195–£2,695
3.0 m2 panels£2,995–£3,595

See every size on the tilt and slide doors page or try the guide price tool.

Survey, manufacture and fitting around Renfrew

Surveys in the PA4 district are booked at a time that suits you. After you approve the quote, manufacture is typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off; on fitting day the old door comes out, the new frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1 day for a straight swap in an existing opening.

Do you need approval in Renfrew?

In Scotland, replacing a door like for like in a house does not usually need a building warrant, but the new door must still meet the Scottish building standards for energy and safety. Forming or widening an opening is different: that needs a building warrant from the council before work starts.

Finishes and extras for tilt and slide doors

  • Colours. White, woodgrain or coloured foils on uPVC; standard or RAL powder coats on aluminium.
  • Material. uPVC for a lower price and shorter lead time, or aluminium for slimmer frames and powder-coated colours.
  • Sash side. A left or right opening sash, chosen to suit furniture, the patio layout and the way you walk out.

Questions about tilt and slide doors in Renfrew

How soon can you survey in Renfrew?

Surveys in the PA4 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off.

What is a tilt and slide door?

A tilt and slide door is a patio door whose opening sash can either tilt inward at the top for ventilation, or move forward and slide parallel across the fixed panel. The handle selects the mode. When closed, the sash is pulled back into the frame and sealed on all four sides, so it behaves more like a large window than a conventional slider.

How long does a tilt and slide door take?

A tilt and slide door typically takes 2–4 weeks to make in uPVC and 4–6 weeks in aluminium, from survey sign-off. Fitting typically takes 1 day for a straight swap in an existing opening, including removing the old door and making good. These are typical times rather than fixed promises, and the date is confirmed once the order is placed.

How much does a tilt and slide patio door cost?

Tilt and slide patio doors start from a guide price of £1,995 for a 1.5 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 2.1 m door is a guide £2,395–£2,895, and a 3 m door is around £2,995. Aluminium frames, colour and triple glazing move the figure up, and the final price is fixed in a written quote after survey.

Ready to price your sliding doors?

Use the guide price tool, or book a free survey and fixed written quote.

CallGet a quote