- Postcode district
- LL13
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 8–10 weeks from survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Rhosllannerchrugog, Buckley, Llangollen
- Building rules
- Wales
Are timber and alu-clad sliding doors right for your Wrexham home?
Before you settle on a door type, it helps to know what timber and alu-clad sliding doors do well and what to check before you order.
For a listed building or a house in a conservation area in Wrexham, check with the local planning authority before choosing any new door; timber frames are often closer in character to the original joinery.
Whether you live in Wrexham or elsewhere in Clwyd, an exposed coastal or hilltop elevation makes a strong case for alu-clad rather than all-timber outside.
- Many timber systems use lift and slide hardware, letting large, heavy panels glide easily and then settle onto compressed seals for a tight closure.
- Stains, paints and lacquers are sprayed in the factory under controlled conditions, giving a more even and longer-lasting coat than a finish brushed on site.
- A timber sliding door sits comfortably beside brick, stone, render or weatherboarding, which helps where a modern metal frame would look out of character.
Planning glass for the light in Wrexham
Sun angles matter for big glazed doors. Around Wrexham, midday sun reaches about 60° in summer and drops to about 14° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
How much do timber and alu-clad sliding doors cost in Wrexham?
Pricing is transparent and does not change because you are in Wrexham. The ranges below cover a standard-height door, fitted, with VAT; options are itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £5,995–£7,395 |
| 4.0 m | 3 panels | £9,095–£11,095 |
| 4.8 m | 4 panels | £10,395–£12,595 |
See every size on the timber and alu-clad sliding doors page or try the guide price tool.
How fitting works in Wrexham
Here is the usual sequence in Wrexham: guide price, free survey, written quote, then manufacture (typically 8–10 weeks from survey sign-off). Fitting typically takes 1 day for a two-panel swap; 1–2 days for larger doors. Nearby, we also survey in Rhosllannerchrugog, Buckley and Llangollen.
Rules for timber and alu-clad sliding doors in Wales
Wales sets its own Building Regulations guidance, including Approved Document L (Wales) for energy. A replacement sliding door must meet those requirements and use safety glass, and we arrange compliance through a registered installer or the local Building Control service.
Specification choices for timber and alu-clad sliding doors in Wrexham
- Timber species. Oak or another hardwood for a visible grain, or engineered softwood where a painted finish is planned.
- Interior finish. Clear lacquer, a wood stain or a painted colour, chosen to match floors, beams or kitchen units.
- Glass. Double or triple glazed safety glass, with slim glazing bars available for a period look.
Questions about timber and alu-clad sliding doors in Wrexham
Do I need building approval for timber and alu-clad sliding doors in Wrexham?
In Wales a replacement door must meet the Building Regulations as applied in Wales, arranged through a registered installer or Building Control. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
Are timber sliding doors secure?
Timber sliding doors are secure when built with multi-point locking, laminated glass and robust sections, because engineered timber gives the locking keeps a solid, dense fixing. Timber systems are available tested to PAS 24, the UK enhanced security test standard for doorsets. Internally beaded glass and a key-locking handle add further resistance to forced entry.
How big can a timber sliding door be?
A timber sliding door in our range is typically about 1.5 m to 4.8 m wide overall, in two to four panels, at standard 2.1 m height or taller on request. Individual panel sizes depend on the system and glass weight; larger panels usually move to lift and slide hardware so they stay easy to open. Sizes are confirmed after survey.
How long do timber sliding doors take to make?
Timber and alu-clad sliding doors typically take 8–10 weeks to make after survey sign-off, longer than metal or uPVC, because each door is joinery-made, factory finished and allowed to cure before delivery. Fitting typically takes 1 day for a two-panel swap and 1–2 days for larger doors. These are typical timescales, confirmed once your order is placed.