- Postcode district
- DA5
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 8–10 weeks from survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Bexleyheath, Sidcup, Chislehurst
- Building rules
- England
Is a timber and alu-clad sliding door a good fit for your home in Bexley?
A few practical points decide whether timber and alu-clad sliding doors suit a particular room and opening:
Where the back of a Bexley home faces south and takes full sun, choosing alu-clad keeps the timber protected and cuts out the re-coating that strong sunlight makes necessary.
For a listed building or a house in a conservation area in Bexley, check with the local planning authority before choosing any new door; timber frames are often closer in character to the original joinery.
- Scratches and dents on internal timber faces can usually be sanded and refinished locally, rather than needing a whole panel replaced.
- Many timber systems use lift and slide hardware, letting large, heavy panels glide easily and then settle onto compressed seals for a tight closure.
- An alu-clad exterior shields the wood from rain and sunlight, so the outside needs only washing while the inside keeps a natural timber finish.
Sunlight, glass and orientation in Bexley
At the latitude of Bexley, the midday sun climbs to about 62° in late June but only about 15° in late December, when daylight lasts around 7 h 50 min against 16 h 38 min in midsummer. A south-facing timber and alu-clad sliding door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
Typical costs for timber and alu-clad sliding doors around Bexley
Use these guide prices to budget. They include VAT, fitting and taking away an old door of a similar size. Taller doors, triple glazing and dual colour add to the figure — the online tool shows how much.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £5,095–£6,195 |
| 1.8 m | 2 panels | £5,595–£6,795 |
| 2.1 m | 2 panels | £5,995–£7,395 |
See every size on the timber and alu-clad sliding doors page or try the guide price tool.
Survey, manufacture and fitting around Bexley
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 8–10 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a two-panel swap; 1–2 days for larger doors for a door like this.
Do you need approval in Bexley?
English Building Regulations treat a new or replacement external door in an existing home as a controlled fitting: it needs a U-value of 1.4 W/m²K or better (or Doorset Energy Rating band C) if more than 60% of it is glazed (Approved Document L), and safety glass in a critical location (Approved Document K). Compliance is arranged through a competent person scheme installer or a Building Control notification, so you get a certificate for your records.
Which options matter for timber and alu-clad sliding doors?
- Interior finish. Clear lacquer, a wood stain or a painted colour, chosen to match floors, beams or kitchen units.
- Alu-cladding. A powder-coated aluminium outer shell in a standard or RAL colour, with timber left on show inside.
- Timber species. Oak or another hardwood for a visible grain, or engineered softwood where a painted finish is planned.
Questions about timber and alu-clad sliding doors in Bexley
Is the price different in Bexley?
No. Guide prices for timber and alu-clad sliding doors are the same across mainland Britain, including Bexley. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
How much do timber sliding doors cost?
Timber and alu-clad sliding doors start from a guide price of £5,095 for a 1.5 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 2.4 m door is a guide £6,495–£7,995, and a 4.8 m four-panel door is around £10,395. Species, cladding, finish and glass all affect the figure, and the final price is fixed in a written quote after survey.
Are timber sliding doors energy efficient?
Timber sliding doors are energy efficient because wood insulates naturally, and engineered timber systems typically achieve whole-door U-values comparable with good thermally broken aluminium, depending on the glass. In England, a new or replacement door in an existing home with more than 60% glazing must reach 1.4 W/m²K or better, and the glazing is specified to meet that. Wales, Scotland and Northern Ireland set their own energy rules.
How big can a timber sliding door be?
A timber sliding door in our range is typically about 1.5 m to 4.8 m wide overall, in two to four panels, at standard 2.1 m height or taller on request. Individual panel sizes depend on the system and glass weight; larger panels usually move to lift and slide hardware so they stay easy to open. Sizes are confirmed after survey.