- Postcode district
- DA6
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 8–10 weeks from survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Bexley, Sidcup, Woolwich
- Building rules
- England
Why choose timber and alu-clad sliding doors in Bexleyheath?
These are the points a surveyor will go through with you when you choose timber and alu-clad sliding doors for a home in Bexleyheath:
Oak floors, exposed beams or a timber kitchen in your Bexleyheath home? Matching the inside finish of the door ties the new glazing into the room.
Whether you live in Bexleyheath or elsewhere in Greater London, an exposed coastal or hilltop elevation makes a strong case for alu-clad rather than all-timber outside.
- Engineered timber is laminated from several layers with the grain opposed, so frames resist the twisting and warping that solid timber can suffer as the seasons change.
- The inside face can be finished to match existing oak floors, stair parts or window boards, so the new door feels part of the room rather than an addition.
- A timber sliding door sits comfortably beside brick, stone, render or weatherboarding, which helps where a modern metal frame would look out of character.
Planning glass for the light in Bexleyheath
Daylight in Bexleyheath runs from about 7 h 50 min in December to 16 h 38 min in June, with the noon sun at roughly 15° and 62° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
How much do timber and alu-clad sliding doors cost in Bexleyheath?
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Bexleyheath home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £6,495–£7,995 |
| 3.0 m | 2 panels | £7,495–£9,095 |
| 3.6 m | 3 panels | £8,395–£10,295 |
See every size on the timber and alu-clad sliding doors page or try the guide price tool.
From survey to fitted door in Bexleyheath
Here is the usual sequence in Bexleyheath: guide price, free survey, written quote, then manufacture (typically 8–10 weeks from survey sign-off). Fitting typically takes 1 day for a two-panel swap; 1–2 days for larger doors. Nearby, we also survey in Bexley, Sidcup and Woolwich.
Do you need approval in Bexleyheath?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Options to consider for your timber and alu-clad sliding door
- Sliding hardware. Inline rollers on smaller doors, or lift and slide gear for larger and heavier panels.
- Glass. Double or triple glazed safety glass, with slim glazing bars available for a period look.
- Alu-cladding. A powder-coated aluminium outer shell in a standard or RAL colour, with timber left on show inside.
Questions about timber and alu-clad sliding doors in Bexleyheath
How soon can you survey in Bexleyheath?
Surveys in the DA6 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 8–10 weeks from survey sign-off.
How often do timber sliding doors need treating?
Timber sliding doors need the outside re-coated every few years, depending on how exposed the elevation is and which finish system is used; doors facing full sun or coastal weather need attention soonest. Alu-clad doors avoid this, needing only an occasional wash outside. Inside, timber only needs wiping and an occasional refresh of the lacquer or oil, and a clean track protects the rollers.
How big can a timber sliding door be?
A timber sliding door in our range is typically about 1.5 m to 4.8 m wide overall, in two to four panels, at standard 2.1 m height or taller on request. Individual panel sizes depend on the system and glass weight; larger panels usually move to lift and slide hardware so they stay easy to open. Sizes are confirmed after survey.
Can I fit timber sliding doors to a listed building or in a conservation area?
Timber sliding doors can suit listed buildings and conservation areas, but listed buildings and properties under an Article 4 direction may need consent before any door is changed, so check with your local planning authority first. In England, replacing doors on an ordinary house with similar-looking ones is usually permitted development. Wales, Scotland and Northern Ireland have their own planning rules.