- Postcode district
- SY21
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 8–10 weeks from survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Newtown, Oswestry, Church Stretton
- Building rules
- Wales
Are timber and alu-clad sliding doors right for your Welshpool home?
These are the points a surveyor will go through with you when you choose timber and alu-clad sliding doors for a home in Welshpool:
If your Welshpool home is a period property or a barn conversion, timber and alu-clad sliding doors can bring in more light without the modern look of a metal frame.
Where the back of a Welshpool home faces south and takes full sun, choosing alu-clad keeps the timber protected and cuts out the re-coating that strong sunlight makes necessary.
- A timber sliding door sits comfortably beside brick, stone, render or weatherboarding, which helps where a modern metal frame would look out of character.
- The inside face can be finished to match existing oak floors, stair parts or window boards, so the new door feels part of the room rather than an addition.
- Scratches and dents on internal timber faces can usually be sanded and refinished locally, rather than needing a whole panel replaced.
Light and sun in Welshpool
Daylight in Welshpool runs from about 7 h 37 min in December to 16 h 52 min in June, with the noon sun at roughly 14° and 61° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
What should you budget for timber and alu-clad sliding doors in Welshpool?
Pricing is transparent and does not change because you are in Welshpool. The ranges below cover a standard-height door, fitted, with VAT; options are itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £5,095–£6,195 |
| 2.1 m | 2 panels | £5,995–£7,395 |
| 4.0 m | 3 panels | £9,095–£11,095 |
See every size on the timber and alu-clad sliding doors page or try the guide price tool.
What happens when you order timber and alu-clad sliding doors in Welshpool?
Surveys in the SY21 district are booked at a time that suits you. After you approve the quote, manufacture is typically 8–10 weeks from survey sign-off; on fitting day the old door comes out, the new frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1 day for a two-panel swap; 1–2 days for larger doors.
Do you need approval in Welshpool?
Wales sets its own Building Regulations guidance, including Approved Document L (Wales) for energy. A replacement sliding door must meet those requirements and use safety glass, and we arrange compliance through a registered installer or the local Building Control service.
Choosing the specification
- Sliding hardware. Inline rollers on smaller doors, or lift and slide gear for larger and heavier panels.
- Handles. Traditional or contemporary handles in bronze, black, satin chrome or brass-effect finishes.
- Alu-cladding. A powder-coated aluminium outer shell in a standard or RAL colour, with timber left on show inside.
Questions about timber and alu-clad sliding doors in Welshpool
Can you match other doors and windows in my Welshpool home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
Can I fit timber sliding doors to a listed building or in a conservation area?
Timber sliding doors can suit listed buildings and conservation areas, but listed buildings and properties under an Article 4 direction may need consent before any door is changed, so check with your local planning authority first. In England, replacing doors on an ordinary house with similar-looking ones is usually permitted development. Wales, Scotland and Northern Ireland have their own planning rules.
What is the difference between timber and alu-clad sliding doors?
The difference is the outside face: a timber sliding door is wood inside and out, while an alu-clad door has a powder-coated aluminium shell fixed over the exterior timber. Alu-clad needs only washing outside and comes in any RAL colour; all-timber needs periodic re-coating but keeps a natural wood look on both faces. The inside is timber either way.
How often do timber sliding doors need treating?
Timber sliding doors need the outside re-coated every few years, depending on how exposed the elevation is and which finish system is used; doors facing full sun or coastal weather need attention soonest. Alu-clad doors avoid this, needing only an occasional wash outside. Inside, timber only needs wiping and an occasional refresh of the lacquer or oil, and a clean track protects the rollers.