- Postcode district
- BT64
- Survey
- Free, area covered by arrangement
- Typical lead time
- Typically 2–4 weeks from survey sign-off
- Guide price
- From £1,695 inc VAT
- Nearby
- Lurgan, Portadown, Tandragee
- Building rules
- Northern Ireland
Is a uPVC sliding patio door a good fit for your home in Craigavon?
These are the points a surveyor will go through with you when you choose uPVC sliding patio doors for a home in Craigavon:
The rules for a replacement door in Craigavon are checked at survey, and your written quote says which approval route applies to your home.
For a rental or family home in Craigavon, frames that never need painting keep upkeep down to an occasional wipe, which is one reason uPVC sliding patio doors suit tighter budgets.
- uPVC frames never need painting or staining; an occasional wipe with warm soapy water keeps white or foiled finishes looking clean.
- Shoot-bolt or hook locking on the sliding panel, plus anti-lift devices, help stop the panel being lifted or levered out of the frame from outside.
- Multi-chambered uPVC profiles trap still air inside the frame, so the frame itself insulates well without needing a separate thermal break.
How much sun will a door in Craigavon get?
The midday sun over Craigavon ranges from about 12° at the winter solstice to about 59° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
Guide prices for uPVC sliding patio doors in Craigavon
These are guide prices for fitted doors at a standard height, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £1,895–£2,295 |
| 3.0 m | 2 panels | £2,495–£3,095 |
| 3.6 m | 3 panels | £2,895–£3,495 |
See every size on the uPVC sliding patio doors page or try the guide price tool.
How fitting works in Craigavon
Here is the usual sequence in Craigavon: guide price, free survey, written quote, then manufacture (typically 2–4 weeks from survey sign-off). Fitting typically takes 1 day for a straight swap in an existing opening. Nearby, we also survey in Lurgan, Portadown and Tandragee. Craigavon is in an area we cover by arrangement: the survey is still free, and survey dates, delivery and any travel cost for delivery and fitting are confirmed in your quote before you order.
Rules for uPVC sliding patio doors in Northern Ireland
Building control in Northern Ireland is run by district councils under the Building Regulations (Northern Ireland). We take on work in Northern Ireland by arrangement and confirm what approval your door needs before anything is ordered.
Finishes and extras for uPVC sliding patio doors
- Glass. Toughened double glazing as standard, with laminated, obscure or solar-control units available.
- Threshold. A standard threshold for a straight swap, or a lower threshold where the floor build-up allows.
- Trims and cills. A matching uPVC cill, add-on trims and internal finishing so the new door sits neatly against existing plaster and brick.
Questions about uPVC sliding patio doors in Craigavon
Can you match other doors and windows in my Craigavon home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
How much do uPVC sliding patio doors cost?
uPVC sliding patio doors start from a guide price of £1,695 for a 1.5 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 2.4 m door is a guide £2,195–£2,695, and a 3.6 m three-panel door is around £2,895. Coloured foils, glass upgrades and a low threshold move the figure up, and the final price is fixed in a written quote after survey.
How quickly can a uPVC patio door be fitted?
A uPVC sliding patio door is typically made in 2–4 weeks after you sign off the surveyed specification, the shortest lead time of the sliding door materials. A straight swap in the same opening typically takes 1 day, including removing the old door, fitting, sealing and making good inside. Times are typical rather than promised, and foiled colours can add a little time.
How do I maintain a uPVC sliding door?
A uPVC sliding door needs only light maintenance: wipe the frames with warm soapy water, avoid abrasive cleaners that dull the surface, and vacuum the track so grit does not wear the rollers. Lubricate the lock keeps and handle mechanism once a year. If the panel drags, the rollers can usually be adjusted rather than replaced. Check the drainage slots in the outer frame after autumn leaf fall, as blocked slots let water sit in the track.