- Postcode district
- BT62
- Survey
- Free, area covered by arrangement
- Typical lead time
- Typically 2–4 weeks from survey sign-off
- Guide price
- From £1,695 inc VAT
- Nearby
- Portadown, Banbridge, Craigavon
- Building rules
- Northern Ireland
Why choose uPVC sliding patio doors in Tandragee?
A few practical points decide whether uPVC sliding patio doors suit a particular room and opening:
Replacing a tired patio door in Tandragee? A uPVC slider usually fits the existing opening, so the job is a straight swap rather than building work.
The rules for a replacement door in Tandragee are checked at survey, and your written quote says which approval route applies to your home.
- As the least expensive sliding door material, uPVC lets you replace a draughty older patio door with modern double glazing on a modest budget.
- A two-panel uPVC slider usually fits the same opening as an old patio door, so a straight swap avoids building work and typically takes a day.
- Compressible gaskets and brush pile seals along the interlock reduce the draughts and rattles that an older patio door with worn seals often suffers from.
Sunlight, glass and orientation in Tandragee
Because Tandragee sees long summer days (about 17 h 13 min) and short winter ones (about 7 h 18 min), the elevation your door faces makes a real difference. With the midday sun at about 12° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
uPVC sliding patio doors prices in Tandragee
Pricing is transparent and does not change because you are in Tandragee. The ranges below cover a standard-height door, fitted, with VAT; options are itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £1,695–£2,095 |
| 1.8 m | 2 panels | £1,895–£2,295 |
| 3.0 m | 2 panels | £2,495–£3,095 |
See every size on the uPVC sliding patio doors page or try the guide price tool.
Survey, manufacture and fitting around Tandragee
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 2–4 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a straight swap in an existing opening for a door like this. Tandragee is in an area we cover by arrangement: the survey is still free, and survey dates, delivery and any travel cost for delivery and fitting are confirmed in your quote before you order.
Rules for uPVC sliding patio doors in Northern Ireland
Building control in Northern Ireland is run by district councils under the Building Regulations (Northern Ireland). We take on work in Northern Ireland by arrangement and confirm what approval your door needs before anything is ordered.
Which options matter for uPVC sliding patio doors?
- Panel layout. Choose which side slides, or a three-panel layout for openings beyond about 3 m.
- Handles. Lever or pull handles in white, black, chrome or gold-effect finishes, with a key lock on the outside.
- Trims and cills. A matching uPVC cill, add-on trims and internal finishing so the new door sits neatly against existing plaster and brick.
Questions about uPVC sliding patio doors in Tandragee
Is the price different in Tandragee?
The door price is the same as anywhere else. Because Tandragee is covered by arrangement, any travel cost for delivery and fitting is shown in your quote before you order; the survey itself is free.
How much do uPVC sliding patio doors cost?
uPVC sliding patio doors start from a guide price of £1,695 for a 1.5 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 2.4 m door is a guide £2,195–£2,695, and a 3.6 m three-panel door is around £2,895. Coloured foils, glass upgrades and a low threshold move the figure up, and the final price is fixed in a written quote after survey.
What sizes do uPVC sliding doors come in?
uPVC sliding doors are made to measure, so they come in any size within the system limits rather than set sizes. Our uPVC range covers overall widths from about 1.5 m to 3.6 m at standard 2.1 m height. Two panels cover most openings up to about 3 m, and beyond that a third panel is added. For larger openings, aluminium carries bigger panels.
How do I maintain a uPVC sliding door?
A uPVC sliding door needs only light maintenance: wipe the frames with warm soapy water, avoid abrasive cleaners that dull the surface, and vacuum the track so grit does not wear the rollers. Lubricate the lock keeps and handle mechanism once a year. If the panel drags, the rollers can usually be adjusted rather than replaced. Check the drainage slots in the outer frame after autumn leaf fall, as blocked slots let water sit in the track.