- Postcode district
- SO41
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks from survey sign-off
- Guide price
- From £1,695 inc VAT
- Nearby
- New Milton, Christchurch, Totton
- Building rules
- England
Are uPVC sliding patio doors right for your Lymington home?
Here is what to weigh up if you are considering uPVC sliding patio doors for a home in Lymington:
Replacing a tired patio door in Lymington? A uPVC slider usually fits the existing opening, so the job is a straight swap rather than building work.
For a rental or family home in Lymington, frames that never need painting keep upkeep down to an occasional wipe, which is one reason uPVC sliding patio doors suit tighter budgets.
- A two-panel uPVC slider usually fits the same opening as an old patio door, so a straight swap avoids building work and typically takes a day.
- Shoot-bolt or hook locking on the sliding panel, plus anti-lift devices, help stop the panel being lifted or levered out of the frame from outside.
- uPVC frames never need painting or staining; an occasional wipe with warm soapy water keeps white or foiled finishes looking clean.
Daylight in Lymington and what it means for your glass
Sun angles matter for big glazed doors. Around Lymington, midday sun reaches about 63° in summer and drops to about 16° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
What should you budget for uPVC sliding patio doors in Lymington?
Guide prices are the same across Hampshire: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £1,695–£2,095 |
| 1.8 m | 2 panels | £1,895–£2,295 |
| 3.6 m | 3 panels | £2,895–£3,495 |
See every size on the uPVC sliding patio doors page or try the guide price tool.
Survey, manufacture and fitting around Lymington
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 2–4 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a straight swap in an existing opening for a door like this.
Rules for uPVC sliding patio doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Finishes and extras for uPVC sliding patio doors
- Foiled colours. Anthracite grey, black, cream or woodgrain foils on one or both faces, for an extra charge.
- Threshold. A standard threshold for a straight swap, or a lower threshold where the floor build-up allows.
- Panel layout. Choose which side slides, or a three-panel layout for openings beyond about 3 m.
Questions about uPVC sliding patio doors in Lymington
Do I need building approval for uPVC sliding patio doors in Lymington?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
How do I maintain a uPVC sliding door?
A uPVC sliding door needs only light maintenance: wipe the frames with warm soapy water, avoid abrasive cleaners that dull the surface, and vacuum the track so grit does not wear the rollers. Lubricate the lock keeps and handle mechanism once a year. If the panel drags, the rollers can usually be adjusted rather than replaced. Check the drainage slots in the outer frame after autumn leaf fall, as blocked slots let water sit in the track.
How quickly can a uPVC patio door be fitted?
A uPVC sliding patio door is typically made in 2–4 weeks after you sign off the surveyed specification, the shortest lead time of the sliding door materials. A straight swap in the same opening typically takes 1 day, including removing the old door, fitting, sealing and making good inside. Times are typical rather than promised, and foiled colours can add a little time.
Are uPVC sliding doors secure?
uPVC sliding doors are secure when the sliding panel has multi-point locking, anti-lift protection and steel reinforcement in the frame. Systems are available tested to PAS 24, the UK enhanced security standard for doorsets. Laminated glass adds resistance to breaking through, and a key-locking handle stops the door being opened from inside if a pane is broken.