- Postcode district
- BH25
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks from survey sign-off
- Guide price
- From £1,695 inc VAT
- Nearby
- Christchurch, Lymington, Ringwood
- Building rules
- England
Is a uPVC sliding patio door a good fit for your home in New Milton?
Most homeowners choosing uPVC sliding patio doors want the same things: more light, a clear view and a door that is easy to live with.
For a rental or family home in New Milton, frames that never need painting keep upkeep down to an occasional wipe, which is one reason uPVC sliding patio doors suit tighter budgets.
If the windows on your New Milton home are white or woodgrain uPVC, uPVC sliding patio doors in a matching finish keep the rear of the house looking uniform.
- Compressible gaskets and brush pile seals along the interlock reduce the draughts and rattles that an older patio door with worn seals often suffers from.
- A two-panel uPVC slider usually fits the same opening as an old patio door, so a straight swap avoids building work and typically takes a day.
- Woodgrain and colour foils, including anthracite grey and black, let a uPVC door match existing windows instead of appearing as a white frame on a coloured elevation.
Daylight in New Milton and what it means for your glass
The midday sun over New Milton ranges from about 16° at the winter solstice to about 63° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
How much do uPVC sliding patio doors cost in New Milton?
Guide prices are the same across Hampshire: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £1,695–£2,095 |
| 2.4 m | 2 panels | £2,195–£2,695 |
| 3.0 m | 2 panels | £2,495–£3,095 |
See every size on the uPVC sliding patio doors page or try the guide price tool.
How fitting works in New Milton
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 2–4 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a straight swap in an existing opening for a door like this.
Rules for uPVC sliding patio doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Which options matter for uPVC sliding patio doors?
- Panel layout. Choose which side slides, or a three-panel layout for openings beyond about 3 m.
- Trims and cills. A matching uPVC cill, add-on trims and internal finishing so the new door sits neatly against existing plaster and brick.
- Foiled colours. Anthracite grey, black, cream or woodgrain foils on one or both faces, for an extra charge.
Questions about uPVC sliding patio doors in New Milton
How soon can you survey in New Milton?
Surveys in the BH25 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 2–4 weeks from survey sign-off.
What sizes do uPVC sliding doors come in?
uPVC sliding doors are made to measure, so they come in any size within the system limits rather than set sizes. Our uPVC range covers overall widths from about 1.5 m to 3.6 m at standard 2.1 m height. Two panels cover most openings up to about 3 m, and beyond that a third panel is added. For larger openings, aluminium carries bigger panels.
Should I choose uPVC or aluminium for a sliding door?
Choose uPVC if budget and a quick, simple replacement matter most, and aluminium if you want slimmer frames, bigger panels or a powder-coated colour. uPVC insulates well and costs less, but its frames are wider and its panels smaller. Aluminium suits openings over about 3.6 m and modern extensions. Our aluminium vs uPVC guide sets out the differences.
How do I maintain a uPVC sliding door?
A uPVC sliding door needs only light maintenance: wipe the frames with warm soapy water, avoid abrasive cleaners that dull the surface, and vacuum the track so grit does not wear the rollers. Lubricate the lock keeps and handle mechanism once a year. If the panel drags, the rollers can usually be adjusted rather than replaced. Check the drainage slots in the outer frame after autumn leaf fall, as blocked slots let water sit in the track.