- Postcode district
- BA2
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks from survey sign-off
- Guide price
- From £1,695 inc VAT
- Nearby
- Bradford-on-Avon, Keynsham, Trowbridge
- Building rules
- England
What uPVC sliding patio doors offer homes in Bath
A few practical points decide whether uPVC sliding patio doors suit a particular room and opening:
Replacing a tired patio door in Bath? A uPVC slider usually fits the existing opening, so the job is a straight swap rather than building work.
For a rental or family home in Bath, frames that never need painting keep upkeep down to an occasional wipe, which is one reason uPVC sliding patio doors suit tighter budgets.
- uPVC frames never need painting or staining; an occasional wipe with warm soapy water keeps white or foiled finishes looking clean.
- Steel reinforcement inside the main profiles keeps the frame rigid, holds the locking hardware firmly and stops the sliding panel flexing over the years.
- Woodgrain and colour foils, including anthracite grey and black, let a uPVC door match existing windows instead of appearing as a white frame on a coloured elevation.
How much sun will a door in Bath get?
Daylight in Bath runs from about 7 h 51 min in December to 16 h 37 min in June, with the noon sun at roughly 15° and 62° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
Guide prices for uPVC sliding patio doors in Bath
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Bath home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £1,695–£2,095 |
| 3.0 m | 2 panels | £2,495–£3,095 |
| 3.6 m | 3 panels | £2,895–£3,495 |
See every size on the uPVC sliding patio doors page or try the guide price tool.
How fitting works in Bath
Here is the usual sequence in Bath: guide price, free survey, written quote, then manufacture (typically 2–4 weeks from survey sign-off). Fitting typically takes 1 day for a straight swap in an existing opening. Nearby, we also survey in Bradford-on-Avon, Keynsham and Trowbridge.
Rules for uPVC sliding patio doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Choosing the specification
- Threshold. A standard threshold for a straight swap, or a lower threshold where the floor build-up allows.
- Panel layout. Choose which side slides, or a three-panel layout for openings beyond about 3 m.
- Foiled colours. Anthracite grey, black, cream or woodgrain foils on one or both faces, for an extra charge.
Questions about uPVC sliding patio doors in Bath
Do I need building approval for uPVC sliding patio doors in Bath?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
Are uPVC sliding doors energy efficient?
uPVC sliding doors are energy efficient because the plastic frame conducts little heat, with whole-door U-values typically around 1.3–1.6 W/m²K double glazed, depending on profile and glass. In England, a replacement door in an existing home with more than 60% glazing must achieve 1.4 W/m²K or better, so the sealed unit is specified to meet it. Wales, Scotland and Northern Ireland set their own energy requirements.
How do I maintain a uPVC sliding door?
A uPVC sliding door needs only light maintenance: wipe the frames with warm soapy water, avoid abrasive cleaners that dull the surface, and vacuum the track so grit does not wear the rollers. Lubricate the lock keeps and handle mechanism once a year. If the panel drags, the rollers can usually be adjusted rather than replaced. Check the drainage slots in the outer frame after autumn leaf fall, as blocked slots let water sit in the track.
How much do uPVC sliding patio doors cost?
uPVC sliding patio doors start from a guide price of £1,695 for a 1.5 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 2.4 m door is a guide £2,195–£2,695, and a 3.6 m three-panel door is around £2,895. Coloured foils, glass upgrades and a low threshold move the figure up, and the final price is fixed in a written quote after survey.