- Postcode district
- CO1
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off
- Guide price
- From £8,695 inc VAT
- Nearby
- Coggeshall, Halstead, Sudbury
- Building rules
- England
Why choose corner sliding doors in Colchester?
These are the points a surveyor will go through with you when you choose corner sliding doors for a home in Colchester:
Corner glazing changes how a Colchester home looks from neighbouring gardens, so confirm the planning position for the extension with your designer or the local planning authority before ordering.
A Colchester garden that sits to the side as well as the rear of the house is where a post-free corner earns its place, opening the room towards both.
- With no post at the corner, sliding both sets of panels back opens the meeting point of two walls completely, so the room spills straight onto the patio.
- Low or flush thresholds can run around both elevations, giving one continuous level line from the floor inside to a terrace that wraps the corner.
- Corner systems use thermally broken aluminium sections with slim sightlines and powder-coated finishes, so the frames stay discreet on both walls.
Sunlight, glass and orientation in Colchester
In Colchester the shortest day has roughly 7 h 46 min of daylight and the longest about 16 h 43 min. The noon sun sits near 15° above the horizon in winter and 62° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
How much do corner sliding doors cost in Colchester?
Guide prices include the door, fitting and structural calculations, including VAT. The steelwork that supports the corner is designed by the engineer and priced after survey, because it depends on the building.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 4 panels | £8,695–£10,595 |
| 3.6 m | 4 panels | £9,595–£11,795 |
| 6.0 m | 6 panels | £13,395–£16,295 |
See every size on the corner sliding doors page or try the guide price tool.
From survey to fitted door in Colchester
Surveys in the CO1 district are booked at a time that suits you. Once the opening is ready and measured, manufacture is typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off; on fitting day the frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1–2 days for the door, after 3–5 days of structural building work.
Do you need approval in Colchester?
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Options to consider for your corner sliding door
- Threshold. Standard, low or flush thresholds, with drainage detailed along both elevations.
- Colours. Single or dual colour powder coating, so the outside can match the extension cladding or render.
- Roof junction. Head details coordinated with flat roofs, roof lanterns or pitched roofs so steel, frame and roof meet neatly.
Questions about corner sliding doors in Colchester
Can you match other doors and windows in my Colchester home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
How do you maintain a corner sliding door?
Maintaining a corner sliding door is much like any aluminium slider, with extra attention to the corner: keep both tracks and the corner drainage clear, wipe the corner seals, and check the meeting panels still lock smoothly. Rollers can be adjusted if a panel drops. Because a new extension can settle slightly in its first year, the corner panels may need a small adjustment after that.
How big can a corner sliding door be?
A corner sliding door in our range typically covers about 3 m to 8 m of combined width across both walls, usually four panels up to about 4.8 m and six panels above that. The two sides do not need to be equal. Panel height starts at the standard 2.1 m and can go taller depending on the system, which is confirmed at survey alongside the structural design.
How much do corner sliding doors cost?
Corner sliding doors start from a guide price of £8,695 for 3 m of combined width across both walls, fitted, inc VAT, at standard 2.1 m height. A 4.8 m combined corner is a guide £11,495–£13,995, and 8 m combined is around £16,495. Structural steel for the post-free corner is priced separately, and the final price is fixed in a written quote after survey.