- Postcode district
- EX8
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 3–5 weeks after survey sign-off
- Guide price
- From £1,695 inc VAT
- Nearby
- Sidmouth, Exeter, Newton Abbot
- Building rules
- England
Is an internal glass sliding door a good fit for your home in Exmouth?
The right door depends on the opening, the room and the way you use the garden. Here is how internal glass sliding doors tend to work out in practice:
For an Exmouth terrace where the hallway gets almost no daylight, glazed internal doors are one way to borrow light from the rooms either side.
If you are extending a home in Exmouth, ask your builder to allow solid fixing above any opening where you want internal glass sliding doors, before the walls are boarded.
- Soft-close dampers ease the panel to a stop at either end of its travel, protecting fingers and the glass from the jolt of a door pushed too hard.
- Slim powder-coated aluminium frames give the look of traditional steel glazing while being far lighter, which keeps the track and wall fixings simpler.
- Glazing bars can be arranged in grids, single horizontal rails or plain full-height panes, so the door can be matched to a period house or a modern extension.
Light and sun in Exmouth
Light travels further than you might expect through internal glass. When the noon sun in Exmouth sits at only about 16° in December, a glazed internal door lets light from a south-facing room reach the back of the house.
What should you budget for internal glass sliding doors in Exmouth?
Guide prices are the same across Devon. They cover the door supplied and fitted into a prepared opening, including VAT, with options itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 0.9 m | 1 panel | £1,695–£2,095 |
| 1.6 m | 2 panels | £2,295–£2,795 |
| 3.2 m | 4 panels | £3,495–£4,295 |
See every size on the internal glass sliding doors page or try the guide price tool.
Timescales for internal glass sliding doors in Exmouth
Here is the usual sequence in Exmouth: guide price, free survey, written quote, then manufacture (typically 3–5 weeks after survey sign-off). Fitting typically takes around 1 day for a single or two-panel door.
Rules for internal glass sliding doors in England
Fitting an internal sliding or pocket door is not usually notifiable building work in England. Approved Document K treats glass in doors as a critical location, so we only supply safety glass for internal doors. If a wall has to be altered to form a pocket, check first whether it is load-bearing.
Options to consider for your internal glass sliding door
- Reeded or fluted glass. Vertically ribbed glass that blurs the view through while keeping the room bright.
- Fixed side panel. A matching non-opening glass panel beside the door to fill a wider opening or form a glazed screen.
- Single sliding panel. One glass panel that slides across the wall, suiting standard doorways and studies.
Questions about internal glass sliding doors in Exmouth
Do you fit internal glass sliding doors in Exmouth?
Yes. We survey and fit internal glass sliding doors in Exmouth and across Devon, including nearby Sidmouth and Exeter. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
Can the track be fixed to a plasterboard wall?
A top track can be fitted to a plasterboard wall only if there is solid support behind it, such as a timber header or noggins, because the track carries the full weight of the glass. Where the wall cannot take it, the track can often be fixed to the ceiling joists instead. We check the construction above the opening during the survey.
Will a glass sliding door stop kitchen noise and smells?
A glass sliding door reduces noise and cooking smells but will not block them completely. Because the panel slides in front of the opening rather than closing against stops, small gaps remain at the edges. Brush seals help, and laminated glass can dampen sound a little more than toughened, but if you need a quiet, sealed room a hinged door is more effective.
How much space do I need beside the doorway?
A surface-mounted sliding door needs clear wall beside the opening that is at least as wide as the panel, so it has somewhere to park when open. For a bi-parting pair you need that space on both sides. Light switches, radiators and architraves in that zone may need moving or the design adjusting, which we check at survey.