- Postcode district
- EX17
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 3–5 weeks after survey sign-off
- Guide price
- From £1,695 inc VAT
- Nearby
- Exeter, Tiverton, Okehampton
- Building rules
- England
Internal glass sliding doors in Crediton: what to know
These are the points a surveyor will go through with you when you choose internal glass sliding doors for a home in Crediton:
Knocking through two rooms in Crediton to create an open-plan kitchen? A steel-look glass slider lets you keep the light and still shut the cooking in when you want.
Whatever the age of your Crediton home, measure the wall beside the doorway first: the panel needs somewhere to slide, and that one dimension often settles the design.
- Daylight from a bright room passes straight through to a darker one, so a north-facing hallway or inner room can feel lighter without adding a window.
- Soft-close dampers ease the panel to a stop at either end of its travel, protecting fingers and the glass from the jolt of a door pushed too hard.
- Because the panel slides across the wall rather than into it, there is no need to open up the wall, making installation quicker and cleaner than a pocket door.
Daylight in Crediton and what it means for your glass
Internal glazed doors are mostly about borrowed light. In Crediton, winter daylight lasts only around 7 h 57 min, so a glass door between a bright extension and a darker hallway or dining room can make a noticeable difference from November to February.
Internal glass sliding doors prices in Crediton
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Crediton home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 0.9 m | 1 panel | £1,695–£2,095 |
| 1.2 m | 1 panel | £1,895–£2,395 |
| 3.2 m | 4 panels | £3,495–£4,295 |
See every size on the internal glass sliding doors page or try the guide price tool.
How fitting works in Crediton
A surveyor checks the doorway, the wall and the floor in your Crediton home and talks through the glass or door finish. After you approve the written quote, the door is made typically 3–5 weeks after survey sign-off, and fitting usually takes around 1 day for a single or two-panel door.
Rules for internal glass sliding doors in England
Fitting an internal sliding or pocket door is not usually notifiable building work in England. Approved Document K treats glass in doors as a critical location, so we only supply safety glass for internal doors. If a wall has to be altered to form a pocket, check first whether it is load-bearing.
Options to consider for your internal glass sliding door
- Single sliding panel. One glass panel that slides across the wall, suiting standard doorways and studies.
- Grid glazing bars. A pattern of horizontal and vertical bars for the classic factory-window look.
- Fixed side panel. A matching non-opening glass panel beside the door to fill a wider opening or form a glazed screen.
Questions about internal glass sliding doors in Crediton
How soon can you survey in Crediton?
Surveys in the EX17 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 3–5 weeks after survey sign-off.
Can the track be fixed to a plasterboard wall?
A top track can be fitted to a plasterboard wall only if there is solid support behind it, such as a timber header or noggins, because the track carries the full weight of the glass. Where the wall cannot take it, the track can often be fixed to the ceiling joists instead. We check the construction above the opening during the survey.
Can internal glass sliding doors go into a new extension?
Yes, and fitting them as part of an extension is often simpler, because the builder can put solid timber or a lintel above the opening for the track while the walls are open. Tell us the finished floor and ceiling heights early so the panels can be sized accurately once the plastering is done.
What are steel-look internal sliding doors?
Steel-look internal sliding doors are glass doors with slim, dark aluminium frames and glazing bars designed to resemble traditional steel windows. Aluminium is used because it is lighter, does not rust and takes a durable powder-coat finish, while still giving the narrow sightlines that make the industrial style recognisable. They slide on a top track rather than swinging open.