- Postcode district
- EX10
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 3–5 weeks after survey sign-off
- Guide price
- From £1,695 inc VAT
- Nearby
- Honiton, Exmouth, Exeter
- Building rules
- England
Is an internal glass sliding door a good fit for your home in Sidmouth?
Before you settle on a door type, it helps to know what internal glass sliding doors do well and what to check before you order.
If you are extending a home in Sidmouth, ask your builder to allow solid fixing above any opening where you want internal glass sliding doors, before the walls are boarded.
For a Sidmouth terrace where the hallway gets almost no daylight, glazed internal doors are one way to borrow light from the rooms either side.
- Soft-close dampers ease the panel to a stop at either end of its travel, protecting fingers and the glass from the jolt of a door pushed too hard.
- Because the panel slides across the wall rather than into it, there is no need to open up the wall, making installation quicker and cleaner than a pocket door.
- Slim powder-coated aluminium frames give the look of traditional steel glazing while being far lighter, which keeps the track and wall fixings simpler.
Planning glass for the light in Sidmouth
Light travels further than you might expect through internal glass. When the noon sun in Sidmouth sits at only about 16° in December, a glazed internal door lets light from a south-facing room reach the back of the house.
Typical costs for internal glass sliding doors around Sidmouth
These are guide prices for fitted doors, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 0.9 m | 1 panel | £1,695–£2,095 |
| 1.6 m | 2 panels | £2,295–£2,795 |
| 2.0 m | 2 panels | £2,595–£3,195 |
See every size on the internal glass sliding doors page or try the guide price tool.
What happens when you order internal glass sliding doors in Sidmouth?
Here is the usual sequence in Sidmouth: guide price, free survey, written quote, then manufacture (typically 3–5 weeks after survey sign-off). Fitting typically takes around 1 day for a single or two-panel door.
Rules for internal glass sliding doors in England
Internal doors are generally outside the Building Regulations notification rules, with two things to watch: we only use safety glazing in glass doors, in line with Approved Document K, and any change to a load-bearing wall needs structural advice and Building Control approval.
Options to consider for your internal glass sliding door
- Fixed side panel. A matching non-opening glass panel beside the door to fill a wider opening or form a glazed screen.
- Bi-parting pair. Two panels that slide apart from the centre for a wide, symmetrical opening.
- Reeded or fluted glass. Vertically ribbed glass that blurs the view through while keeping the room bright.
Questions about internal glass sliding doors in Sidmouth
How soon can you survey in Sidmouth?
Surveys in the EX10 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 3–5 weeks after survey sign-off.
Can internal glass sliding doors go into a new extension?
Yes, and fitting them as part of an extension is often simpler, because the builder can put solid timber or a lintel above the opening for the track while the walls are open. Tell us the finished floor and ceiling heights early so the panels can be sized accurately once the plastering is done.
How much space do I need beside the doorway?
A surface-mounted sliding door needs clear wall beside the opening that is at least as wide as the panel, so it has somewhere to park when open. For a bi-parting pair you need that space on both sides. Light switches, radiators and architraves in that zone may need moving or the design adjusting, which we check at survey.
What are steel-look internal sliding doors?
Steel-look internal sliding doors are glass doors with slim, dark aluminium frames and glazing bars designed to resemble traditional steel windows. Aluminium is used because it is lighter, does not rust and takes a durable powder-coat finish, while still giving the narrow sightlines that make the industrial style recognisable. They slide on a top track rather than swinging open.