- Postcode district
- SP10
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 3–5 weeks after survey sign-off
- Guide price
- From £1,695 inc VAT
- Nearby
- Winchester, Amesbury, Newbury
- Building rules
- England
Are internal glass sliding doors right for your Andover home?
Before you settle on a door type, it helps to know what internal glass sliding doors do well and what to check before you order.
If you are extending a home in Andover, ask your builder to allow solid fixing above any opening where you want internal glass sliding doors, before the walls are boarded.
Working from home in Andover and need a door on the study without it feeling boxed in? Reeded glass gives privacy on calls while the room still feels part of the house.
- Soft-close dampers ease the panel to a stop at either end of its travel, protecting fingers and the glass from the jolt of a door pushed too hard.
- The top track carries the panel, so the floor stays continuous across the doorway with only a discreet guide where the door parks.
- Every panel uses toughened or laminated safety glass, so if one is broken by accident it either crumbles into small blunt pieces or stays held together.
Daylight in Andover and what it means for your glass
In winter, Andover gets about 7 h 52 min of daylight against 16 h 35 min in June. Internal sliding and pocket doors help by keeping openings clear during the day and closing off rooms for warmth in the evening.
Guide prices for internal glass sliding doors in Andover
Guide prices are the same across Hampshire. They cover the door supplied and fitted into a prepared opening, including VAT, with options itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 0.9 m | 1 panel | £1,695–£2,095 |
| 2.0 m | 2 panels | £2,595–£3,195 |
| 2.4 m | 2 panels | £2,895–£3,495 |
See every size on the internal glass sliding doors page or try the guide price tool.
Survey, manufacture and fitting around Andover
Here is the usual sequence in Andover: guide price, free survey, written quote, then manufacture (typically 3–5 weeks after survey sign-off). Fitting typically takes around 1 day for a single or two-panel door.
Rules for internal glass sliding doors in England
Fitting an internal sliding or pocket door is not usually notifiable building work in England. Approved Document K treats glass in doors as a critical location, so we only supply safety glass for internal doors. If a wall has to be altered to form a pocket, check first whether it is load-bearing.
Specification choices for internal glass sliding doors in Andover
- Fixed side panel. A matching non-opening glass panel beside the door to fill a wider opening or form a glazed screen.
- Grid glazing bars. A pattern of horizontal and vertical bars for the classic factory-window look.
- Bi-parting pair. Two panels that slide apart from the centre for a wide, symmetrical opening.
Questions about internal glass sliding doors in Andover
Do I need building approval for internal glass sliding doors in Andover?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
Will a glass sliding door stop kitchen noise and smells?
A glass sliding door reduces noise and cooking smells but will not block them completely. Because the panel slides in front of the opening rather than closing against stops, small gaps remain at the edges. Brush seals help, and laminated glass can dampen sound a little more than toughened, but if you need a quiet, sealed room a hinged door is more effective.
How much does an internal glass sliding door cost?
Fitted internal glass sliding doors have a guide price of £1,695 for a single 900 mm panel, inc VAT at standard 2.1 m height, rising to £2,895–£3,495 for a 2,400 mm two-panel door. The glass type, number of glazing bars and track arrangement move the price within those ranges, and your written quote after survey fixes it.
Can the track be fixed to a plasterboard wall?
A top track can be fitted to a plasterboard wall only if there is solid support behind it, such as a timber header or noggins, because the track carries the full weight of the glass. Where the wall cannot take it, the track can often be fixed to the ceiling joists instead. We check the construction above the opening during the survey.