Are internal pocket doors right for homes in South Glamorgan?
A few practical points decide whether internal pocket doors suit a particular room and opening:
Before arranging a survey at your South Glamorgan home, check whether the wall beside the doorway carries radiators, sockets or pipes, because those decide whether internal pocket doors will fit.
If your South Glamorgan home has a cramped en suite where the door clashes with the basin, a pocket door is worth measuring for before you consider moving the sanitaryware.
- Reclaims the floor area a hinged door needs to swing, which in a small bathroom or cloakroom can be the difference between fitting a vanity unit and going without.
- A double pocket door, with two leaves parting from the centre, opens up a wide doorway between a kitchen and a living area without any doors standing in the room.
- When the door is fully open it disappears into the wall, leaving a clear doorway that makes two connected rooms feel like one larger space.
Guide prices for internal pocket doors in South Glamorgan
These are guide prices for fitted doors, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| Single pocket door | 1 leaf | £895–£1,595 |
| Double pocket door | 2 leaves | £1,695–£2,795 |
Every size is on the internal pocket doors page.
Daylight and glass in South Glamorgan
Light travels further than you might expect through internal glass. When the noon sun in South Glamorgan sits at only about 15° in December, a glazed internal door lets light from a south-facing room reach the back of the house.
Towns we cover in South Glamorgan
We survey and fit internal pocket doors in 6 towns across South Glamorgan, including the CF10, CF61, CF62, CF64, CF71 postcode districts.
Approvals in Wales
In Wales, as elsewhere, the main points for internal doors are glass and structure: we only use safety glass in glazed doors, and forming a pocket in a load-bearing wall needs Building Control approval.
Questions about internal pocket doors in South Glamorgan
Do I need building approval for internal pocket doors in South Glamorgan?
In Wales a replacement door must meet the Building Regulations as applied in Wales, arranged through a registered installer or Building Control. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
Can a pocket door be fitted into an existing wall?
Yes, a pocket door can usually be fitted into an existing wall, but it involves opening up the wall beside the doorway. In a stud partition we remove the plasterboard, fit the pocket frame and board it again. In a masonry wall the usual approach is a new stud lining, and if the wall is load-bearing, forming the pocket becomes structural work that needs proper assessment and approval first.
How much does an internal pocket door cost?
Our guide price for a fitted internal pocket door is £895–£1,595 for a single and £1,695–£2,795 for a double, inc VAT at standard height. Where your door falls in that range depends on the leaf, the hardware, the wall construction and how much making good is needed. The final figure is fixed in a written quote after we have surveyed the wall.
Can I put a light switch on the wall with the pocket?
Not on the pocket section itself, because the door slides through that cavity and there is nowhere to run a cable or fix a back box. Switches and sockets can usually move to the other side of the doorway or to an adjoining wall. We point out any that need moving at survey, and an electrician should relocate them before the pocket frame goes in.