- Postcode district
- EH42
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £7,495 inc VAT
- Nearby
- North Berwick, Haddington, Duns
- Building rules
- Scotland
Why choose lift and slide doors in Dunbar?
Most homeowners choosing lift and slide doors want the same things: more light, a clear view and a door that is easy to live with.
If your Dunbar home has an exposed elevation that takes driving rain, the compressed seals of lift and slide doors give a tighter closure than brush-sealed sliders.
Planning a terrace door wider than about 4 m in Dunbar? Lift and slide hardware lets each panel be larger, so the opening needs fewer interlocks.
- A lowered panel sits on the frame rather than its rollers, so a part-open door will not drift in a gust and can be left a hand's width open for fresh air.
- Deep, thermally broken frames carry thick triple glazed units where needed, with typical whole-door U-values around 0.8–1.1 W/m²K at that specification.
- Turning the handle raises the panel clear of its gaskets before it moves, so the seals are not scuffed along the frame and keep their shape for longer.
How much sun will a door in Dunbar get?
Daylight in Dunbar runs from about 6 h 57 min in December to 17 h 37 min in June, with the noon sun at roughly 11° and 57° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
Typical costs for lift and slide doors around Dunbar
Guide prices are the same across Edinburgh and the Lothians: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.6 m | 2 panels | £9,695–£11,795 |
| 4.0 m | 2 panels | £10,395–£12,695 |
| 6.0 m | 3 panels | £13,995–£16,995 |
See every size on the lift and slide doors page or try the guide price tool.
From survey to fitted door in Dunbar
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 6–8 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1–2 days, plus 3–5 days of building work beforehand if the opening is new or widened for a door like this.
Rules for lift and slide doors in Scotland
In Scotland, replacing a door like for like in a house does not usually need a building warrant, but the new door must still meet the Scottish building standards for energy and safety. Forming or widening an opening is different: that needs a building warrant from the council before work starts.
Finishes and extras for lift and slide doors
- Threshold. Standard, low or flush threshold, the flush version with a drainage channel set into the terrace.
- Glass. Double or triple glazed safety glass, with acoustic laminated or solar-control units for exposed or noisy sites.
- Material. Thermally broken aluminium, or timber and alu-clad timber lift and slide systems for a warmer interior look.
Questions about lift and slide doors in Dunbar
Do I need building approval for lift and slide doors in Dunbar?
In Scotland a like-for-like replacement door usually needs no building warrant, but must meet the building standards; new openings need a warrant. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
How heavy and wide can lift and slide panels be?
Lift and slide panels can typically be larger and heavier than standard sliding panels, often several hundred kilograms each, depending on the system and glass. Our range covers overall widths from about 2.4 m to 6 m in two or three panels. Very large panels need a structural opening sized for them and careful handling, often with lifting equipment, which is planned at survey.
What is the lead time for a lift and slide door?
A lift and slide door typically takes 6–8 weeks to manufacture after you sign off the surveyed specification, reflecting the heavy-duty hardware and large glass units. Fitting typically takes 1–2 days with a larger team. If the opening is being formed or widened, allow 3–5 days of building work beforehand. These are typical times, confirmed once the order is placed.
How does a lift and slide door work?
A lift and slide door works through a geared handle: turn it and the mechanism raises the panel a few millimetres onto rollers so it slides freely; turn it back and the panel lowers onto the frame, compressing the seals. The seals are never dragged while the panel moves, which helps them last, and the lowered panel stays exactly where you leave it.