- Postcode district
- SW3
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals
- Guide price
- From £6,595 inc VAT
- Nearby
- Battersea, Kensington, Fulham
- Building rules
- England
Are sliding doors for new openings right for your Chelsea home?
Before you settle on a door type, it helps to know what sliding doors for new openings do well and what to check before you order.
Turning a Chelsea kitchen window into a door to the garden? Check where drains, gullies and air bricks sit outside, because they can affect the new threshold.
Where a Chelsea house has a bay, chimney breast or upstairs window directly above the planned opening, the engineer will need to account for it in the steel design.
- The door is measured from the finished opening rather than from drawings, so it fits the opening as built, not as it was intended to be built.
- Making good the reveals and head after the steel goes in leaves a square, plumb opening, which is what a precision-made sliding door needs to run smoothly.
- A structural engineer sizes the steel beam and padstones for the actual loads above, so the opening is designed rather than guessed.
Sunlight, glass and orientation in Chelsea
Sun angles matter for big glazed doors. Around Chelsea, midday sun reaches about 62° in summer and drops to about 15° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
Guide prices for sliding doors for new openings in Chelsea
Guide prices cover the door and forming the opening — steel beam, padstones, making good and structural calculations — fitted, including VAT. Building Control fees are set by your council and are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £6,995–£7,795 |
| 2.4 m | 2 panels | £7,895–£8,895 |
| 6.0 m | 4 panels | £13,295–£15,095 |
See every size on the sliding doors for new openings page or try the guide price tool.
From survey to fitted door in Chelsea
Nothing is ordered until you sign off the surveyed specification. The door is made from the finished opening sizes (typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals), and fitting usually takes 3–5 days of building work, then 1–2 days to fit the door. If you are in Battersea or Kensington, the same process and prices apply.
Rules for sliding doors for new openings in England
In England, forming or widening an opening is structural work that needs a Building Regulations application, structural calculations and usually a steel beam on padstones. The new door is also a controlled fitting (U-value 1.4 W/m²K or better if more than 60% glazed). If steelwork bears on a party wall, the Party Wall etc. Act 1996 may apply.
Specification choices for sliding doors for new openings in Chelsea
- Window to door conversion. Cutting down below an existing window to form a door opening to the garden.
- Low threshold detail. Adjusting floor and outside levels during the building work to allow a lower sill.
- Concealed steel. Setting the beam so it sits above the ceiling line, giving a cleaner head detail inside.
Questions about sliding doors for new openings in Chelsea
How soon can you survey in Chelsea?
Surveys in the SW3 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals.
How long does it take to form a new opening?
Forming or widening an opening typically involves 3–5 days of building work, including propping, cutting out, installing the steel and padstones, and making good. The sliding door is then made to the finished opening, which typically takes 4–6 weeks for aluminium, so a secure temporary closure is fitted in between. The door itself typically goes in within one to two days.
Why does beam deflection matter for sliding doors?
Beam deflection matters because a sliding door needs a straight, level head to run properly. Every beam bends slightly under load, and if it bends too much the frame can be squeezed, making panels stiff or causing them to bind. Telling the structural engineer that a large sliding door will go underneath allows them to design a stiffer beam.
Do I need building regulations to widen a door opening?
Yes, forming or widening an opening is structural work and needs a Building Regulations application in England, supported by structural calculations. Building Control inspects the work, typically including the steel and its bearings. In Scotland a building warrant is needed. Wales and Northern Ireland follow their own building regulations through local authority or district council building control.