- Postcode district
- W6
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals
- Guide price
- From £6,595 inc VAT
- Nearby
- Notting Hill, Kensington, Chiswick
- Building rules
- England
Is a sliding door for a new opening a good fit for your home in Hammersmith?
Before you settle on a door type, it helps to know what sliding doors for new openings do well and what to check before you order.
Living in a Hammersmith flat? Structural changes to an external wall almost always need the agreement of the building's owner or the other owners, so speak to them first.
Turning a Hammersmith kitchen window into a door to the garden? Check where drains, gullies and air bricks sit outside, because they can affect the new threshold.
- If the work affects a party wall, notice can be served under the Party Wall etc. Act 1996 (England and Wales) before it starts, avoiding disputes with neighbours later.
- Structural calculations are included in the guide price, and the Building Regulations application is handled as part of the project, so you are not left coordinating engineers and inspectors.
- Making good the reveals and head after the steel goes in leaves a square, plumb opening, which is what a precision-made sliding door needs to run smoothly.
Sunlight, glass and orientation in Hammersmith
Because Hammersmith sees long summer days (about 16 h 38 min) and short winter ones (about 7 h 50 min), the elevation your door faces makes a real difference. With the midday sun at about 15° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
New and widened openings for sliding doors prices in Hammersmith
Guide prices cover the door and forming the opening — steel beam, padstones, making good and structural calculations — fitted, including VAT. Building Control fees are set by your council and are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £6,995–£7,795 |
| 3.0 m | 2 panels | £8,795–£9,895 |
| 3.6 m | 3 panels | £9,695–£10,895 |
See every size on the sliding doors for new openings page or try the guide price tool.
Survey, manufacture and fitting around Hammersmith
A surveyor visits your Hammersmith home to check the wall, the structure above and the floor levels, and talks through glass and finish. Any building work is planned to the engineer's design, the door is made to the finished opening sizes — typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals — and fitting usually takes 3–5 days of building work, then 1–2 days to fit the door.
Do you need approval in Hammersmith?
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Finishes and extras for sliding doors for new openings
- Low threshold detail. Adjusting floor and outside levels during the building work to allow a lower sill.
- Steel beam with padstones. A beam sized by the engineer to carry the wall, floors and roof above.
- Concealed steel. Setting the beam so it sits above the ceiling line, giving a cleaner head detail inside.
Questions about sliding doors for new openings in Hammersmith
Is the price different in Hammersmith?
No. Guide prices for sliding doors for new openings are the same across mainland Britain, including Hammersmith. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
Can you turn a window into a sliding door?
Yes, a window opening can usually be extended down to the floor and often widened to take a sliding door. The work involves removing the masonry below the window, forming a new threshold, and fitting a steel beam or lintel if the opening is widened. Drains, air bricks and floor levels outside need checking, and the work needs a Building Regulations application.
Why does beam deflection matter for sliding doors?
Beam deflection matters because a sliding door needs a straight, level head to run properly. Every beam bends slightly under load, and if it bends too much the frame can be squeezed, making panels stiff or causing them to bind. Telling the structural engineer that a large sliding door will go underneath allows them to design a stiffer beam.
Does the Party Wall Act apply to my new opening?
The Party Wall etc. Act 1996 (England and Wales) may apply if the new steel beam bears on, or is cut into, a wall you share with a neighbour, as is common in semi-detached and terraced houses. If it applies, you must serve notice on the neighbour before the work starts. A rear wall entirely on your own property is less likely to be affected.