- Postcode district
- W5
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals
- Guide price
- From £6,595 inc VAT
- Nearby
- Acton, Chiswick, Southall
- Building rules
- England
What sliding doors for new openings offer homes in Ealing
Most homeowners choosing sliding doors for new openings want the same things: more light, a clear view and a door that is easy to live with.
Turning an Ealing kitchen window into a door to the garden? Check where drains, gullies and air bricks sit outside, because they can affect the new threshold.
Living in an Ealing flat? Structural changes to an external wall almost always need the agreement of the building's owner or the other owners, so speak to them first.
- If the work affects a party wall, notice can be served under the Party Wall etc. Act 1996 (England and Wales) before it starts, avoiding disputes with neighbours later.
- Making good the reveals and head after the steel goes in leaves a square, plumb opening, which is what a precision-made sliding door needs to run smoothly.
- Temporary propping holds up the wall above while the masonry is cut out, keeping floors, ceilings and the roof safely supported throughout the work.
Light and sun in Ealing
The midday sun over Ealing ranges from about 15° at the winter solstice to about 62° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
Guide prices for sliding doors for new openings in Ealing
Guide prices cover the door and forming the opening — steel beam, padstones, making good and structural calculations — fitted, including VAT. Building Control fees are set by your council and are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £6,995–£7,795 |
| 2.4 m | 2 panels | £7,895–£8,895 |
| 3.0 m | 2 panels | £8,795–£9,895 |
See every size on the sliding doors for new openings page or try the guide price tool.
Survey, manufacture and fitting around Ealing
Nothing is ordered until you sign off the surveyed specification. The door is made from the finished opening sizes (typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals), and fitting usually takes 3–5 days of building work, then 1–2 days to fit the door. If you are in Acton or Chiswick, the same process and prices apply.
Do you need approval in Ealing?
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Which options matter for sliding doors for new openings?
- Widening an existing door. Removing masonry each side of an old patio door to take a wider slider.
- Window to door conversion. Cutting down below an existing window to form a door opening to the garden.
- Temporary door or boarding. A secure, weathertight closure while the made-to-measure door is being manufactured.
Questions about sliding doors for new openings in Ealing
Is the price different in Ealing?
No. Guide prices for sliding doors for new openings are the same across mainland Britain, including Ealing. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
Do I need planning permission for a new opening?
Planning rules for altering an elevation depend on the property and where you are, so it is worth checking with your council before you commit. Flats, listed buildings and properties covered by an Article 4 direction are the most likely to need consent. Wales and Scotland have their own planning rules. Our planning guide sets out the questions to ask.
Can you turn a window into a sliding door?
Yes, a window opening can usually be extended down to the floor and often widened to take a sliding door. The work involves removing the masonry below the window, forming a new threshold, and fitting a steel beam or lintel if the opening is widened. Drains, air bricks and floor levels outside need checking, and the work needs a Building Regulations application.
Do I need a steel beam for sliding doors?
A widened or new opening usually needs a steel beam or a suitable lintel to carry the wall and anything above it, and for wider openings a steel beam is the usual answer. A structural engineer chooses the size and bearing details based on the loads. The beam is placed on padstones at each end to spread its load into the masonry.