- Postcode district
- TW9
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals
- Guide price
- From £6,595 inc VAT
- Nearby
- Twickenham, Hounslow, Barnes
- Building rules
- England
What sliding doors for new openings offer homes in Richmond
A few practical points decide whether sliding doors for new openings suit a particular room and opening:
Turning a Richmond kitchen window into a door to the garden? Check where drains, gullies and air bricks sit outside, because they can affect the new threshold.
If your Richmond home is semi-detached or terraced and the new steel would sit on the shared wall, budget time for party wall notices before work starts.
- Making good the reveals and head after the steel goes in leaves a square, plumb opening, which is what a precision-made sliding door needs to run smoothly.
- The door is measured from the finished opening rather than from drawings, so it fits the opening as built, not as it was intended to be built.
- Telling the engineer that a sliding door will sit beneath the beam lets them limit its deflection, which matters because a beam that sags can stop panels sliding freely.
Sunlight, glass and orientation in Richmond
In Richmond the shortest day has roughly 7 h 50 min of daylight and the longest about 16 h 38 min. The noon sun sits near 15° above the horizon in winter and 62° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
New and widened openings for sliding doors prices in Richmond
Use these guide prices to budget for the whole job in Richmond: the door, the steelwork, making good and the engineer's calculations, including VAT. Building Control or warrant fees are charged by the council on top.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 2 panels | £8,795–£9,895 |
| 4.0 m | 3 panels | £10,295–£11,595 |
| 6.0 m | 4 panels | £13,295–£15,095 |
See every size on the sliding doors for new openings page or try the guide price tool.
Survey, manufacture and fitting around Richmond
Here is the usual sequence in Richmond: guide price, free survey, written quote, any building work, then manufacture (typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals). Fitting typically takes 3–5 days of building work, then 1–2 days to fit the door. Nearby, we also survey in Twickenham, Hounslow and Barnes.
Rules for sliding doors for new openings in England
In England, forming or widening an opening is structural work that needs a Building Regulations application, structural calculations and usually a steel beam on padstones. The new door is also a controlled fitting (U-value 1.4 W/m²K or better if more than 60% glazed). If steelwork bears on a party wall, the Party Wall etc. Act 1996 may apply.
Specification choices for sliding doors for new openings in Richmond
- Window to door conversion. Cutting down below an existing window to form a door opening to the garden.
- Temporary door or boarding. A secure, weathertight closure while the made-to-measure door is being manufactured.
- Concealed steel. Setting the beam so it sits above the ceiling line, giving a cleaner head detail inside.
Questions about sliding doors for new openings in Richmond
Can you match other doors and windows in my Richmond home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
Does the Party Wall Act apply to my new opening?
The Party Wall etc. Act 1996 (England and Wales) may apply if the new steel beam bears on, or is cut into, a wall you share with a neighbour, as is common in semi-detached and terraced houses. If it applies, you must serve notice on the neighbour before the work starts. A rear wall entirely on your own property is less likely to be affected.
How long does it take to form a new opening?
Forming or widening an opening typically involves 3–5 days of building work, including propping, cutting out, installing the steel and padstones, and making good. The sliding door is then made to the finished opening, which typically takes 4–6 weeks for aluminium, so a secure temporary closure is fitted in between. The door itself typically goes in within one to two days.
Do I need a steel beam for sliding doors?
A widened or new opening usually needs a steel beam or a suitable lintel to carry the wall and anything above it, and for wider openings a steel beam is the usual answer. A structural engineer chooses the size and bearing details based on the loads. The beam is placed on padstones at each end to spread its load into the masonry.